MT9M001C12STM-EVAL Micron Technology Inc, MT9M001C12STM-EVAL Datasheet - Page 18

• Manufacturer Part Number: MT9M001C12STM-EVAL
• Manufacturer: Micron Technology Inc

Specifications of MT9M001C12STM-EVAL

• Lead Free Status / Rohs Status: Compliant

Table 7:
PDF: 09005aef81c2856f/Source: 09005aef80a3e031
MT9M001_DS_2.fm - Rev. F 5/06 EN
Register
Test Data
Read Mode 2
This register is used to control many aspects of the readout of the sensor.
Test Data
Black Level Calibration
These registers are used in the black level calibration. Their functionality is described in detail in the next section.
0x2D
0x2E
0x35
0x32
0x20
0x32
Register Description (continued)
11:2
11:2
Bit
6:0
6:0
6:0
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
Even row, odd column
Odd row, odd column
Global gain
Test Data.
The value used to produce a test pattern in “Use Test Data” mode (Reg0x07 bit 6).
No bad frames
0 (default) = only output good frames. A bad frame is defined as the first frame following a change
to: window size or position, horizontal blanking, row or column skip, or mirroring.
Reserved
Reserved
Column skip
col 5…).
0 = normal readout (default).
Row skip
5…).
0 = normal readout (default).
Reserved
Reserved
Flip Row
0 (default) = normal readout.
Reserved
1 = "Continuous" LINE_VALID (continue producing LINE_VALID during vertical blanking).
0 = normal LINE_VALID (default, no LINE_VALID during vertical blanking).
1 = LINE_VALID = "Continuous" LINE_VALID XOR FRAME_VALID.
0 = LINE_VALID determined by bit 9.
Reserved
Reserved
Reserved
Reserved
Mirror Row
0 (default) = normal readout (top to bottom).
Test Data.
The value used to produce a test pattern in “Use Test Data” mode (Reg0x07 bit 6).
—
—
—
—
—
—
—
—
—
—
—
1 = readout starting 1 row later (alternate color pair).
default is 0; do not change.
default is 1; set to “1” at all times.
1 = read out two rows, and then skip two rows (for example, row 0, row 1, row 4, row
default is 0; do not change.
default is 0; set to zero at all times.
default is 1; set to “1” at all times.
default is 0; do not change.
default is 1; do not change.
default is 0; do not change.
default is 0; do not change.
—
—
—
1 = read out from bottom to top (upside down).
default = 0x08 (8) = 1x gain. This register can be used to set all four gains at once.
—
1= read out two columns, and then skip two columns (for example, col 0, col 1, col 4,
1 = output all frames (including bad frames).
—
—
default = 0x08 (8) = 1x gain.
default = 0x08 (8) = 1x gain.
MT9M001: 1/2-Inch Megapixel Digital Image Sensor
18
Description
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2004 Micron Technology, Inc. All rights reserved.
Registers