XCARD XC-1 XMOS, XCARD XC-1 Datasheet - Page 4

• Manufacturer Part Number: XCARD XC-1
• Description: BOARD DEV KIT XS1-G4
• Manufacturer: XMOS
• Series: XCore™r
• Type: MCUr

Specifications of XCARD XC-1

• Contents: Board, Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: XS1-G4
• Other names: 880-1013

XS1-G4 144BGA Datasheet (3.5)
The following table shows the XMOS link fast interface allocation on each XCore
The following table shows the XMOS link serial interface allocation on each XCore
1.1.3 Precedence
5wire fast mode
processor:
2wire serial mode
processor:
Ports and XMOS Links are connected to pins on the XS1-G4 by the program running
on the device. The ports and links are multiplexed and follow a defined precedence
if they overlap on the same core:
Ports always operate at their specified width, even if they share pins with another
port.
Signal
XLA[4:0]in
XLA[4:0]out
XLB[4:0]in
XLB[4:0]out
Signal
XLA[1:0]in
XLA[1:0]out
XLB[1:0]in
XLB[1:0]out
If an XMOS Link is enabled, the link has access to the pins; the pins of the
underlying ports are disabled.
If a port is enabled, it overrules ports with higher widths that share the same
pins. The pins on the wider port that are not shared remain available for use
when the narrower port is enabled.
Description
XCore I/O configured as a 5wire link
XCore I/O configured as a 5wire link
Description
XCore I/O configured as a 2wire link
XCore I/O configured as a 2wire link
www.xmos.com
4/22