CC-9P-V526UJ-S Digi International, CC-9P-V526UJ-S Datasheet - Page 83

• Manufacturer Part Number: CC-9P-V526UJ-S
• Description: MOD 9P 32MB SDRAM 8MB FLASH
• Manufacturer: Digi International
• Series: -r

Specifications of CC-9P-V526UJ-S

• Module/board Type: Core Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Networking

83
N e t w o r k I n t e r f a c e
Ethernet
WLAN Interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ConnectCore 9P 9215, Wi-9P 9215, and 3G 9P 9215 Hardware Reference
A
ConnectCore 3G 9P 9215:
The module size is 50 x 70mm.
Two board-to-board connectors are used on the module. The distance between the
module and the base board depends on the counterpart on the base board. The
minimum distance is 5mm.
The height of the parts mounted on the bottom side of the module does not exceed
2.5mm. The height of the parts mounted on the top side of the modules does not
exceed 10mm including the cellular module.




Note: This WLAN Interface information applies to the ConnectCore Wi-9P 9215
module only.







Standard: IEEE 802.3
Physical layer: 10/100Base-T
Data rate: 10/100 Mbps
Mode: Full or half duplex
Standard: IEEE802.11a/b/g
Frequency: 2.412GHz - 5.875GHz
Data Rates Supported
–
Media Access Protocol
–
Wireless Medium
–
–
DFS Client
–
Modulation
DSSS
–
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Carrier-Sense Multiple Access with Collision Avoidance (CSMA/CA)
802.11b/g: Direct Sequence-Spread Spectrum (DSSS) and Orthogonal
Frequency Divisional Multiplexing (OFDM)
802.11a: OFDM
This module supports the DFS Client only between the 5.25 and 5.35GHz
bands. It does not support being a DFS Master, nor can it be connected to an
ad hoc network in these bands.
Differential Binary Phase Shift Keying (DBPSK) @ 1 Mbps