IDT77V011L155DA IDT, Integrated Device Technology Inc, IDT77V011L155DA Datasheet - Page 26

• Manufacturer Part Number: IDT77V011L155DA
• Description: INTERFACE DPI-UTOPIA 144-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT77V011L155DA

• Interface: DPI, UTOPIA
• Voltage - Supply: 3 V ~ 3.6 V
• Package / Case: 144-TQFP, 144-VQFP
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Applications: -
• Other names: 77V011L155DA

Configuration 2
Subport
Configuration 1
Modify Tx
Subport
Tx Subport Position
Notification Mask
Status
Timeout Status
Rx Out of Range
Subport
Rx Out of Range
Address Mask byte 2
Rx Out of Range
Address Mask byte 1
Rx Out of Range
Address Mask byte 0
Subport
Configuration 2
Rx Subport Position
IDT77V011
8002
8013
8014
8015
8008
8009
800A
800B
801C
800D
800E
8023
8024
[6:2] Max Subports
[4:0] In-Stream™
[7:5] Tx Subport Width 0x0 - 0x7
[4:0] New Subport
5
[2:0] Tx Byte Location 0x0 - 0x7
[5:3] Tx Bit Location
1
1
[4:0] Rx Out of Range
[7:0] Address Mask
[7:0] Address Mask
[7:0] Address Mask
[2:0] Rx Subport Width 0x0 - 0x7
[2:0] Rx Byte Location 0x0 - 0x7
[5:3] Rx Bit Location
1
Subport
Replace Subport 0x0 - 0x7
Address Range
Error
Address Error
Status
Subport
Register [23:16]
Register [15:8]
Register [7:0]
Rx Address Error 1 - 0
Table 14 Transmit Cell Routing Register Table
Table 15 Receive Cell Routing Register Table
0x00 - 0x1E 0x1E
0x00 - 0x1F 0x00
0x00 - 0x1F 0x00
0x0 - 0x7
1 - 0
1 - 0
0x00 - 0x1F 0x00
0xFF
0xFF
0xFF
0x0 - 0x7
26 of 43
0x5
0
Defined by
pin
0x5
0
0
0x00
0x00
0x00
0x5
Defined by
pin
0x5
0
Indicates the maximum subport address for the PHY's connected to the
transmit UTOPIA 2 interface.
Subport address used to filter In-Stream™ programming cells.
Programs how many bits will be used for subport addressing in the trans-
mit direction.
New value used to replace subport address in outgoing cells. This value
will only be used if the Replace Subport bit of the Modify Tx Subport regis-
ter is set to a one.
Indicates whether or not to replace the subport address in outgoing cells.
"0" do not replace the subport address, "1" replace the subport address
with the value in the New Subport bits of the Modify Tx Subport register.
Indicates what byte of the transmit cell header the subport address starts
in. The subport address can cross the byte boundary.
Indicates what bit of the byte defined by the Tx Byte Location bits of the Tx
Subport Position register the MSB of the transmit subport address starts.
The subport address can cross the byte boundary.
Mask Address Range Error notification. "0" no Event Notification cell will
be generated when a Rx Out of Range Address Error occurs, "1" generate
Event Notification cell when a Rx Out of Range Address Error occurs.
Address Range Error indication when an Address Range Error occurs. "0"
no Address Range Error detected, "1" Address Range Error has been
detected.
Indicates that a Address Error occurred more than 25ms ago, and Address
Range error status bit has not been cleared. This bit will return to zero
once the interrupt is cleared. "0" no Address Range Errors detected, "1"
Address Range Error occurred more than 25ms ago and has not been
cleared.
The subport address of a cell containing an invalid cell header.
Value used to validate cells on the receive UTOPIA interface.
Value used to validate cells on the receive UTOPIA interface.
Value used to validate cells on the receive UTOPIA interface.
Programs how many bits will be used for subport addressing in the receive
direction.
Indicates what byte of the receive cell header the subport starts in. The
subport address can cross the byte boundary.
Indicates what bit of the byte defined by the Rx Byte Location bits of the Rx
Subport Position register the MSB of the receive subport address starts.
The subport address can cross the byte boundary.
March 15, 2001