IDT82V2048EBBG IDT, Integrated Device Technology Inc, IDT82V2048EBBG Datasheet - Page 35

• Manufacturer Part Number: IDT82V2048EBBG
• Description: IC LINE INTERFACE UNIT 208-PBGA
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Line Interface Units (LIUs)r

Specifications of IDT82V2048EBBG

• Protocol: E1
• Voltage - Supply: 3.13 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 208-PBGA
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 800-1704; 82V2048EBBG

OCTAL CHANNEL T1/E1/J1 SHORT HAUL LINE INTERFACE UNIT
3.13 GENERAL PURPOSE I/O
GPIO1, GPIO0. These two pins can be considered as digital Input or Output
port by the DIR1 bit (GPIO, A0H) and DIR0 bit (GPIO, A0H) respectively.
If the GPIO1 and GPIO0 are configured as Input port, the LEVEL1 bit (GPIO,
A0H) and the LEVEL0 bit (GPIO, A0H) are used to reflect the level of the
GPIO1 pin and the GPIO0 pin respectively. If the GPIO1 and GPIO0 are
configured as Output port, the content in the LEVEL1 bit and LEVEL0 bit
determines the logic value of GPIO1 pin and GPIO0 pin respectively.
3.14 5V TOLERANT I/O PINS
TTL logic.
The IDT82V2048E provides two general purpose digital I/O pins:
All digital input pins will tolerate 5.0
±
5% volts and are compatible with
35
3.15 RESET OPERATION
•
•
flip-flops are reset, and all the registers are initialized to default values.
3.16 POWER SUPPLY
The chip can be reset in two ways:
After reset, all drivers output are in high impedance state, all the internal
This chip uses a single 3.3 V power supply.
Software Reset: Writing to the RST register (20H) will reset the chip
in 1 us.
Hardware Reset: Asserting the RST pin low for a minimum of 100 ns
will reset the chip.
TEMPERATURE RANGES
INDUSTRIAL