HS9Z-A61 IDEC Corporation, HS9Z-A61 Datasheet - Page 9

• Manufacturer Part Number: HS9Z-A61
• Description: Straight Key for Idec HS6B Safety Switch
• Manufacturer: IDEC Corporation

Specifications of HS9Z-A61

• Lead Free Status / Rohs Status: RoHS Compliant part

HS9Z-A66
Door Interlock Switches
HS9Z-A65
Minimum Radius of Hinged Door
•
When Using the HS9Z-A62/A62S Right-angle Actuator
•
•
When using the HS9Z-A65/HS9Z-A66 Angle Adjustable Actuator
• When door hinge is on the extension line of the interlock switch surface
Horizontal Adjustment
• When door hinge is on the extension line of the actuator mounting surface
Horizontal Adjustment
HS9Z-A65
HS9Z-A66
When using the interlock switch on hinged doors, refer to the minimum radius
of doors shown below. When using on doors with small minimum radius, use
the angle adjustable actuator (HS9Z-A65 and HS9Z-A66).
Note: Because deviation or dislocation of hinged doors may occur in actual applications, make sure
of the correct operation before installation.
When door hinge is on the extension line of the interlock switch surface:
When door hinge is on the extension line of the actuator mounting surface:
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
HS9Z-A65
HS9Z-A66
Vertical Adjustment
HS9Z-A65
HS9Z-A66
Vertical Adjustment
USA: 800-262-IDEC
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Door Hinge
Label
Label
Operating Instructions
Canada: 888-317-IDEC
Actuator Angle Adjustment for the HS9Z-A65/HS9Z-A66
•
•
•
•
Mounting Examples
Application on Sliding Doors
Note: When mounting the actuator, make sure that the actuator enters
Using the angle adjustment screw, the actuator angle can be adjusted (see
fi gures on page 370).
Adjustable angle: 0 to 20°
The larger the adjusted angle of the actuator, the smaller the applicable
radius of the door opening.
After installing the actuator, open the door. Then adjust the actuator so that
its edge can enter properly into the actuator entry slot of the interlock switch.
After adjusting the actuator angle, apply Loctite to the adjustment screw so
that the screw will not become loose.
the slot in the correct direction, as shown on the right.
HS9Z-A61 Actuator
HS6E
Interlock Switch
Door Stop
Latch
Door
Application on Hinged Doors
HS9Z-A62S Actuator
HS6E Series
373