KSZ8692PBI Micrel Inc, KSZ8692PBI Datasheet - Page 36

• Manufacturer Part Number: KSZ8692PBI
• Description: IC ARM9 PHY 10/100MBPS 400-PBGA
• Manufacturer: Micrel Inc

Specifications of KSZ8692PBI

• Applications: Networking & Communications
• Core Processor: ARM9
• Program Memory Type: External Program Memory
• Controller Series: KSZ
• Interface: EBI/EMI, Ethernet, I²C, I²S,PCI, SPI, UART/USART, USB
• Number Of I /o: 20
• Voltage - Supply: 1.235 V ~ 1.365 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Package Type: BGA
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ram Size: -
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Lead free / RoHS Compliant
• Other names: 576-3627; KSZ8692PBI

Notes:
1. P = Power supply.
Micrel, Inc.
March 2010
Test Pins Strapping Options
Pin Number
Pin Number
I = Input. O = Output.
O/I = Output in normal mode; input pin during reset.
Ipu = Internal 55kΩ pull-up resistor.
Ipd = Internal 55kΩ pull-down resistor.
G15
U3
T4
P5
V2
V1
Pin Name
Pin Name
TESTEN1
USBCFG
SCANEN
TESTEN
NWEN
NWPN
Pin Type
Pin Type
Ipu/O
Ipu/O
Ipd
Ipd
Ipd
I
Pin Description
NAND Write Enable, asserted low
During reset, this pin is input strap option for NAND Flash configuration register
(0x8054) bit [0]. This bit along with configuration register bits [2:1] is used for boot
program. This pin along with NCLE and NALE is used to specify NAND Flash size.
[NCLE, NALE, NWEN]
000 = 64Mbit
001 = 128Mbit (default)
010 = 256Mbit
011 = 512Mbit
100 = 1Gbit
101 = 2Gbit
110 = 4Gbit
111 = 8Gbit
NAND Write Protection, asserted low
During reset, this pin is input strap option to enable test modes. This pin along with
TESTEN, TESTEN1 form different test modes.
{TESTEN, TESTEN1, NWPN} =
011: ARM Scan test mode
010: USB Analog Bits test mode
others: refer to TESTEN and TESTEN1 pin description
(factory reserved)
USB port 2 configuration
“1” = port 2 is host
“0” = port 2 is device
( port 1 is always host)
Pin Description
1 = Scan Enable (Factory reserved)
0 = Normal Operation
1 = Test Enable (Factory reserved)
0 = Normal Operation
1 = Test Enable1 (Factory reserved)
0 = Normal Operation
36
M9999-031810-4.0
KSZ8692PB