DC-ME-Y402-JT Digi International, DC-ME-Y402-JT Datasheet - Page 7
![MOD ME 9210 8MB SDRAM 4MB FLASH](/photos/6/75/67531/dc-me-y402-jt_sml.jpg)
DC-ME-Y402-JT
Manufacturer Part Number
DC-ME-Y402-JT
Description
MOD ME 9210 8MB SDRAM 4MB FLASH
Manufacturer
Digi International
Type
Network Controller & Processorr
Specifications of DC-ME-Y402-JT
Module/board Type
Device Server
Data Rate
11 Mbps
Memory Type
Flash, SDRAM
Interface Type
Ethernet
Operating Voltage
3.3 V
Operating Current
250 mA
Maximum Power Dissipation
825 mW
Operating Temperature Range
- 40 C to + 85 C
Board Size
36.7 mm x 19.1 mm x 21.7 mm
Data Bus Width
32 bit
Modulation
CCK, DBPSK, DQPSK
Product
Modules
Security
64/128 bit WEP, TKIP, WPA, WPA2
For Use With/related Products
Networking
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
602-1135
7
Types of Modules
Digi Connect ME
DC-ME-01T-JT
DC-ME4-01T-JT
Digi Connect ME 9210
DC-ME-Y401-JT
DC-ME-Y402-JT
DC-ME-Y402-LX-JT
Model
This chapter provides information about the modules hardware and contains the following
topics:
There are two types of modules. One module utilizes Digi Plug-and-Play Firmware, while
the second is customizable with the option to develop a firmware application in.NET MF or
NET+OS. If you are developing your firmware application in NET+OS, you will be using a
module with a JTAG interface.
Note:
The following figures show the two types of modules.
"Types of Modules" on page 7
"Connectors: Antenna" on page 13
"Connectors: Ethernet Interface" on page 11
"Module LEDs" on page 13
specific features. Similarly, information about the Connect ME applies to the
Connect ME 9210 as well unless stated otherwise.
JTAG is a commonly used term that is also referred to as IEEE 1149.1, an industry
standard test protocol. JTAG is an abbreviation for the European Joint Test Action
Group, which invented the first versions of the IEEE 1149.1 interface. The JTAG
interface, along with the other development tools, enables you to download, run
and debug programs on the module.
Used for development
purposes only
JTAG interface
Description
Digi Connect ME Modules
Figure