DC-ME-Y402-JT Digi International, DC-ME-Y402-JT Datasheet - Page 19
![MOD ME 9210 8MB SDRAM 4MB FLASH](/photos/6/75/67531/dc-me-y402-jt_sml.jpg)
DC-ME-Y402-JT
Manufacturer Part Number
DC-ME-Y402-JT
Description
MOD ME 9210 8MB SDRAM 4MB FLASH
Manufacturer
Digi International
Type
Network Controller & Processorr
Specifications of DC-ME-Y402-JT
Module/board Type
Device Server
Data Rate
11 Mbps
Memory Type
Flash, SDRAM
Interface Type
Ethernet
Operating Voltage
3.3 V
Operating Current
250 mA
Maximum Power Dissipation
825 mW
Operating Temperature Range
- 40 C to + 85 C
Board Size
36.7 mm x 19.1 mm x 21.7 mm
Data Bus Width
32 bit
Modulation
CCK, DBPSK, DQPSK
Product
Modules
Security
64/128 bit WEP, TKIP, WPA, WPA2
For Use With/related Products
Networking
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
602-1135
Primary Serial Port, P1
19
Port Descriptions
Placement of Module
The development board provides the following ports:
See the figure titled "Board Layout and Connector Locations:" on page 17 for the location
of the ports. The following sections describe the ports.
The Primary Serial Port is a DB-9 male connector that is labeled as P1 on the development
board. See the following figure for pin orientation; see the following table for pin
assignments.
Primary Serial Port, P1
Secondary Serial Port, P2
GPIO Port, P7
Caution: When handling the development board, wear a grounding wrist
strap to avoid ESD damage to the board.