DC-ME-Y402-JT Digi International, DC-ME-Y402-JT Datasheet - Page 36
![MOD ME 9210 8MB SDRAM 4MB FLASH](/photos/6/75/67531/dc-me-y402-jt_sml.jpg)
DC-ME-Y402-JT
Manufacturer Part Number
DC-ME-Y402-JT
Description
MOD ME 9210 8MB SDRAM 4MB FLASH
Manufacturer
Digi International
Type
Network Controller & Processorr
Specifications of DC-ME-Y402-JT
Module/board Type
Device Server
Data Rate
11 Mbps
Memory Type
Flash, SDRAM
Interface Type
Ethernet
Operating Voltage
3.3 V
Operating Current
250 mA
Maximum Power Dissipation
825 mW
Operating Temperature Range
- 40 C to + 85 C
Board Size
36.7 mm x 19.1 mm x 21.7 mm
Data Bus Width
32 bit
Modulation
CCK, DBPSK, DQPSK
Product
Modules
Security
64/128 bit WEP, TKIP, WPA, WPA2
For Use With/related Products
Networking
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
602-1135
Flash
SDRAM
Memory
The Digi Connect ME has 2 or 4 MB of flash memory. The Digi Connect Wi-ME has 4 MB
of flash memory.
On the ConnectME/ARM7 family, the flash memory is controlled by chip select 0, located
at 0x02000000.
On the ConnectME-9210/ARM9 family, the flash memory is controlled by chip select 2
(default=st_cs1) and is located at 0x50000000.
The Digi Connect ME and the Digi Connect Wi-ME’s SDRAM is controlled by chip
select 1 and is located at 0x00000000.
The Digi Connect ME 9210’s SDRAM is controlled by chip select 1 (default = dy_cs0)
and is mapped to 0x00000000.
The embedded modules have 8 MB of SDRAM memory.
3 6