ADWPCIXRSKU20 Intel, ADWPCIXRSKU20 Datasheet - Page 130

• Manufacturer Part Number: ADWPCIXRSKU20
• Manufacturer: Intel

Specifications of ADWPCIXRSKU20

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Gate20 Error
Multi-Bit ECC
Error
Parity Error
Error Reporting and Handling
6.4
The BIOS indicates the current testing phase during POST by writing a hex code to I/O location
80h. If errors are encountered, error messages or codes will either be displayed to the video
screen, or if an error has occurred prior to video initialization, errors will be reported through a
series of audio beep codes.
6.4.1
Boot Failure ...
Invalid Boot Diskette
Drive Not Ready
A: Drive Error
B: Drive Error
Insert BOOT diskette in A:
Reboot and Select proper Boot
device or Insert Boot Media in
selected Boot device
NO ROM BASIC
130
Displayed
Message
Message Displayed
Error Messages and Error Codes
The BIOS is unable to properly control the server board’s Gate A20 function, which controls access
of memory over 1 MB. This may indicate a problem with the server board.
This message will only occur on systems using ECC enabled memory modules. ECC memory has
the ability to correct single-bit errors that may occur from faulty memory modules.
A multiple bit corruption of memory has occurred, and the ECC memory algorithm cannot correct it.
This may indicate a defective memory module.
Fatal Memory Parity Error. System halts after displaying this message.
POST Error Messages
This is a generic message indicating the BIOS could not boot from a particular
device. This message is usually followed by other information concerning the
device.
A diskette was found in the drive, but it is not configured as a bootable diskette.
The BIOS was unable to access the drive because it indicated it was not ready
for data transfer. This is often reported by drives when no media is present.
The BIOS attempted to configure the A: drive during POST, but was unable to
properly configure the device. This may be due to a bad cable or faulty diskette
drive.
The BIOS attempted to configure the B: drive during POST, but was unable to
properly configure the device. This may be due to a bad cable or faulty diskette
drive.
The BIOS attempted to boot from the A: drive, but could not find a proper boot
diskette.
BIOS could not find a bootable device in the system and/or removable media
drive does not contain media.
This message occurs on some systems when no bootable device can be
detected.
Table 61. Memory BIOS Messages
Table 62. Boot BIOS Messages
Intel order number C91056-002
Description
Description
Intel® Server Board SE7320VP2
Revision 2.1