PCI-BOARD/S25 Altera, PCI-BOARD/S25 Datasheet - Page 30

• Manufacturer Part Number: PCI-BOARD/S25
• Manufacturer: Altera

Specifications of PCI-BOARD/S25

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Stratix PCI Development Board Data Sheet
30
1.
2.
3.
4.
5.
6.
7.
For optional increased stability, perform the following steps:
1.
2.
3.
Configuration via the JTAG Interface
After power is applied to the Stratix PCI development board, the Stratix
device can be configured. The JTAG interface permits the Quartus
software to load the Stratix device with a user design through the
ByteBlaster II cable. The user design remains in the Stratix device until
power is removed from the board.
To configure the Stratix device using the Quartus II software and the
ByteBlaster II cable, perform the following steps:
1.
2.
Position the board face up with the PCI bracket on the left.
Insert a screw in the hole next to pin 99 of the Agilent/Samtec ASP
Probe connector (J12) and fasten a standoff to the screw.
Insert a screw through the hole next to pin 160 of the HSDI port B
connector (J8) and fasten a standoff to the screw.
Gently place the board face down with the PCI bracket on the right.
Remove the screw adjacent to RN4. Turn the board face up, insert the
screw through the same hole, and fasten a standoff to the screw.
Gently place the board face down with the PCI bracket on the right
Remove the lower screw/nut combination of the RS-232 connector
(J7). Turn the board face-up, place the screw through the same hole,
and fasten a standoff to the screw.
Remove the upper screw/nut combination of the RS-232 connector.
(J7). Turn the board face-up, place the screw through the same hole,
and fasten a standoff to the screw.
Carefully remove the SDRAM SODIMM module in the SODIMM
socket.
Add a final standoff in the hole provided next to the release on the
right side of the SODIMM socket.
Connect the ByteBlaster II cable to J1.
Open the Quartus II SRAM Object File (.sof) that you want to load
into the device, which launches the Quartus II Programmer.
Altera Corporation
®
II