PCI-BOARD/S25 Altera, PCI-BOARD/S25 Datasheet - Page 28

• Manufacturer Part Number: PCI-BOARD/S25
• Manufacturer: Altera

Specifications of PCI-BOARD/S25

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Stratix PCI Development Board Data Sheet
Using the
Board
28
f
Mictor Probe
J6 is a Mictor header that provides probing capability for internal Stratix
device signals. The Mictor probe is compatible with Agilent Technologies
E5346A Probe Adapter for use with Agilent Technologies Logic
Analyzers.
1
The SignalProbe
J6. You do not need to recompile the Stratix design to use the SignalProbe
feature.
Refer to Technical Brief 82: SignalProbe Compilation Enables Fast System
Debugging with the Quartus II Software for a description of the SignalProbe
feature.
When power is applied to the board, the user LEDs flash. At this time, the
Stratix device is automatically configured and, upon successful
configuration, the configuration done LED (D4) illuminates. To configure
the board with a new design, the designer should perform the following
steps, which are explained later in this section.
1.
2.
Apply Power
Power can be introduced by one of the following means:
c
Apply power to the board.
Configure the Stratix device.
Installing the board into a universal PCI slot
Attaching the board to an ATX power supply with the external power
adaptor cable
Attaching the board to an independently powered board via HSDI
port A
Attaching the board to an independently powered board via HSDI
port B
The Mictor Probe Debug Interface shares Stratix signals with the
LCD Interface. Only one of the interfaces can be used at a time.
The board has special power supply circuitry that can be
damaged if more than one power source is applied to the board
at the same time.
TM
feature can be used to route internal Stratix signals to
Altera Corporation