SI5325C-B-GM Silicon Laboratories Inc, SI5325C-B-GM Datasheet - Page 5

• Manufacturer Part Number: SI5325C-B-GM
• Description: IC UP-PROG CLK MULTIPLIER 36QFN
• Manufacturer: Silicon Laboratories Inc
• Type: Clock Multiplierr

Specifications of SI5325C-B-GM

• Number Of Circuits: 1
• Package / Case: 36-QFN
• Pll: Yes
• Input: Clock
• Output: CML, CMOS, LVDS, LVPECL
• Ratio - Input:output: 2:2
• Differential - Input:output: Yes/Yes
• Frequency - Max: 346MHz
• Divider/multiplier: Yes/Yes
• Voltage - Supply: 1.62 V ~ 3.63 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Frequency-max: 346MHz
• Maximum Input Frequency: 710 MHz
• Minimum Input Frequency: 10 MHz
• Output Frequency Range: 10 MHz to 1417 MHz
• Supply Voltage (max): 3.63 V
• Supply Voltage (min): 1.62 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 1.8 V, 2.5 V, 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1. Functional Description
The Si5325 is a low jitter, precision clock multiplier for
applications requiring clock multiplication without jitter
attenuation. The Si5325 accepts dual clock inputs
ranging from 10 to 710 MHz and generates two
independent, synchronous clock outputs ranging from
10 to 945 MHz and select frequencies to 1.4 GHz. The
device provides virtually any frequency translation
combination across this operating range. Independent
dividers are available for each input clock and output
clock, so the Si5325 can accept input clocks at different
frequencies and it can generate output clocks at
different frequencies. The Si5325 input clock frequency
and clock multiplication ratio are programmable through
an I
PC-based software utility, DSPLLsim, that can be used
to determine the optimum PLL divider settings for a
given
combination that minimizes phase noise and power
consumption. This utility can be downloaded from
www.silabs.com/timing.
The Si5325 is based on Silicon Laboratories' 3rd-
generation DSPLL
rate frequency synthesis in a highly integrated PLL
solution that eliminates the need for external VCXO and
loop filter components. The Si5325 PLL loop bandwidth
is digitally programmable and supports a range from
30 kHz to 1.3 MHz. The DSPLLsim software utility can
be used to calculate valid loop bandwidth settings for a
given input clock frequency/clock multiplication ratio.
In the case when the input clocks enter alarm
conditions, the PLL will freeze the DCO output
frequency near its last value to maintain operation with
an internal state close to the last valid operating state.
The Si5325 has two differential clock outputs. The
electrical format of each clock output is independently
programmable to support LVPECL, LVDS, CML, or
CMOS loads. If not required, the second clock output
can be powered down to minimize power consumption.
The phase difference between the selected input clock
and the output clocks is adjustable in 200 ps increments
for system skew control. In addition, the phase of one
output clock may be adjusted in relation to the phase of
the other output clock. The resolution varies from
800 ps to 2.2 ns depending on the PLL divider settings.
Consult the DSPLLsim configuration software to
determine the phase offset resolution for a given input
clock/clock multiplication ratio combination. For system-
level debugging, a bypass mode is available which
drives the output clock directly from the input clock,
bypassing the internal DSPLL. The device is powered
2
C or SPI interface. Silicon Laboratories offers a
input
frequency/clock
®
technology, which provides any-
multiplication
Preliminary Rev. 0.26
ratio
by a single 1.8, 2.5, or 3.3 V supply.
1.1. Further Documentation
Consult the Silicon Laboratories Any-Rate Precision
Clock Family Reference Manual (FRM) for more
detailed information about the Si5325. The FRM can be
downloaded from www.silabs.com/timing.
Silicon Laboratories has developed a PC-based
software utility called DSPLLsim to simplify device
configuration, including frequency planning and loop
bandwidth selection. This utility can be downloaded
from www.silabs.com/timing.
Si5325
5