HW-FMC-XM104-G Xilinx Inc, HW-FMC-XM104-G Datasheet - Page 7

• Manufacturer Part Number: HW-FMC-XM104-G
• Description: CARD, CONNECTIVITY, FMC XM104
• Manufacturer: Xilinx Inc

Specifications of HW-FMC-XM104-G

• Kit Contents: FMC XM104 Connectivity Card, 4x SMA To SMA Cables, SATA Cable, Welcome Letter
• Features: VITA 57.1 FMC High Pin Count (HPC) Connector
• Accessory Type: Interface Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Xilinx FMC-Supported Boards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 122-1693

XM104
Overview
Quick Start
FMC XM104 Connectivity Card User Guide
UG536 (v1.1) September 24, 2010
System Requirements
Hardware
This document describes the FPGA Mezzanine Card (FMC) XM104 connectivity module,
referred to as the XM104 in this guide. A
Description
Table 1-1
FMC high pin count (HPC) (J64) and one FMC low pin count (LPC) (J63) connector
interface. The XM104 connector must be installed on the HPC J64 connector of the ML605
board to have full functionality, as shown in
Table 1-1: FMC Supported Boards
The XM104 can work on LPC FMC interfaces, but with limited functionality. Xilinx boards
containing LPC connectors are supported as follows:
•
•
•
•
•
Notes:
Virtex-6 FPGA ML605 Evaluation Kit
While every effort has been made to comply with the FPGA Mezzanine Card Specification, Xilinx cannot
claim nor assume full compliance with the FMC/VITA-57-1 specification. Consequently, Xilinx cannot
claim nor support the usage of the XM104 on any other FMC (VITA-57.1) board.
Xilinx FMC cards are generally designed to implement expanded functionality for supported Xilinx
evaluation boards (SP601, SP605, or ML605) and thus might exceed the FMC card outline dimensions
discussed in the Single Width FMC Module Mechanical section of the FMC/VITA-57-1 specification.
Therefore, Xilinx FMC cards might not physically fit in a non-Xilinx evaluation board environment.
SP601 - Si5368 clock source only
SP605 - Si5368 clock source and Data Port 0 (DP0) channel
ML605 LPC (J63) - Si5368 and DP0 channel
ML623 - Si5368 clock source only
SP623 - Si5368 clock source only
details the board validated to support the XM104. The ML605 board provides one
Xilinx Platform
are combined within this document.
www.xilinx.com
EK-V6-ML605-G
Quick Start
Part Number
Figure 1-1, page
section and
Connector
9.
FMC HPC
J64
Board Technical
Chapter 1
Connector
FMC LPC
J63
7