DSP56301VF100 Freescale, DSP56301VF100 Datasheet - Page 18

• Manufacturer Part Number: DSP56301VF100
• Manufacturer: Freescale

Specifications of DSP56301VF100

• Device Core Size: 24b
• Format: Fixed Point
• Clock Freq (max): 100MHz
• Mips: 100
• Device Input Clock Speed: 100MHz
• Ram Size: 24KB
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 252
• Package Type: MA-BGA
• Lead Free Status / RoHS Status: Not Compliant

Signals/Connections
1-14
HSERR
HIRQ
HSTOP
HWR/HRW
HIDSEL
HRD/HDS
HFRAME
Signal Name
Output, open
drain
Output, open
drain
Input/
Output
Input
Input
Input
Input/
Output
Type
Tri-stated
Tri-stated
Input
Tri-stated
State During
Table 1-11.
Reset
DSP56301 Technical Data, Rev. 10
Host System Error
When the HI32 is programmed to interface with a PCI bus and the HI function
is selected, this is the Host System Error signal.
Host Interrupt Request
When HI32 is programmed to interface with a universal, non-PCI bus and the
HI function is selected, this is the Host Interrupt Request signal.
Port B
When the HI32 is configured as GPIO through the DCTR, this signal is
internally disconnected.
This input is 5 V tolerant.
Host Stop
When the HI32 is programmed to interface with a PCI bus and the HI function
is selected, this is the Host Stop signal.
Host Write/Host Read-Write
When HI32 is programmed to interface with a universal, non-PCI bus and the
HI function is selected, this is the Host Write/Host Read-Write Schmitt-trigger
signal.
Port B
When the HI32 is configured as GPIO through the DCTR, this signal is
internally disconnected.
This input is 5 V tolerant.
Host Initialization Device Select
When the HI32 is programmed to interface with a PCI bus and the HI function
is selected, this is the Host Initialization Device Select signal.
Host Read/Host Data Strobe
When HI32 is programmed to interface with a universal, non-PCI bus and the
HI function is selected, this is the Host Data Read/Host Data Strobe Schmitt-
trigger signal.
Port B
When the HI32 is configured as GPIO through the DCTR, this signal is
internally disconnected.
This input is 5 V tolerant.
Host Frame
When the HI32 is programmed to interface with a PCI bus and the HI function
is selected, this is the Host cycle Frame signal.
Non-PCI bus
When HI32 is programmed to interface with a universal, non-PCI bus and the
HI function is selected, this signal must be connected to a pull-up resistor or
directly to V
Port B
When the HI32 is configured as GPIO through the DCTR, this signal is
internally disconnected.
This input is 5 V tolerant.
Host Interface (Continued)
CC
.
Signal Description
Freescale Semiconductor