MT45W2MW16BGB-701 IT Micron Technology Inc, MT45W2MW16BGB-701 IT Datasheet - Page 10

• Manufacturer Part Number: MT45W2MW16BGB-701 IT
• Manufacturer: Micron Technology Inc

Specifications of MT45W2MW16BGB-701 IT

• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Compliant

Part Numbering Information
Figure 3:
Valid Part Number Combinations
Device Marking
PDF: 09005aef82832fa2/Source: 09005aef82832f5f
32mb_burst_cr1_0_p24z_2.fm - Rev. E 9/08 EN
Micron Technology
Product family
45 = PSRAM/CellularRAM memory
Operating core voltage
W = 1.7V–1.95V
Address locations
M = Megabits
Operating voltage
W = 1.7–3.6V
Bus configuration
16 = x16
READ/WRITE operation mode
B = Asynchronous/page/burst
Part Number Chart
Package codes
GB = 54-ball VFBGA “green” (6 x 9 grid, 0.75mm pitch, 6.0mm x 8.0mm x 1.0mm)
Note:
Micron CellularRAM devices are available in several configurations and densities.
After building the part number from the part numbering chart, visit the Micron Web site
at
device required is not on this list, contact the factory.
Due to the size of the package, the Micron-standard part number is not printed on the
top of the device. Instead, an abbreviated device mark consisting of a five-digit alphanu-
meric code is used. The abbreviated device marks are cross-referenced to the Micron
part numbers at the FBGA Part Marking Decoder
decoder. To view the location of the abbreviated mark on the device, refer to customer
service note, CSN-11, “Product Mark/Label,” at www.micron.com/csn.
www.micron.com/psram
MT 45 W 2M W 16
–30°C exceeds the CellularRAM Workgroup 1.0 specification of –25°C.
32Mb: 2 Meg x 16 Async/Page/Burst CellularRAM 1.0 Memory
B
to verify that the part number is offered and valid. If the
10
GB -70
8
Micron Technology, Inc., reserves the right to change products or specifications without notice.
WT ES
site, http://www.micron.com/
Part Numbering Information
Production status
Blank = Production
ES = Engineering sample
MS = Mechanical sample
Operating temperature
WT = –30°C to +85°C (see note 1)
IT = –40°C to +85°C
Standby power options
Blank = Standard
Low power = L
Frequency
8 = 80 MHz
1 = 104 MHz
Access/cycle time
70 = 70ns
©2007 Micron Technology, Inc. All rights reserved.