ISP1102W-T NXP Semiconductors, ISP1102W-T Datasheet - Page 7

• Manufacturer Part Number: ISP1102W-T
• Description: RF Transceiver USB FULL SPD TRNSCVR
• Manufacturer: NXP Semiconductors

Specifications of ISP1102W-T

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Operating Supply Voltage (typ): Not RequiredV
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): Not RequiredV
• Operating Supply Voltage (min): Not RequiredV
• Pin Count: 16
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: HBCC-16
• Maximum Data Rate: 12 Mbps
• Maximum Supply Current: 2 mA, 8 mA
• Minimum Operating Temperature: - 40 C
• Protocol Supported: USB 2.0
• Lead Free Status / RoHS Status: Compliant
• Other names: ISP1102W,118

NXP Semiconductors
ISP1102_5
Product data sheet
Sharing mode — V
In this mode, the DP and DM pins are 3-stated and the ISP1102 allows external signals of
up to 3.6 V to share the DP and DM lines. The internal circuits of the ISP1102 ensure that
virtually no current (maximum 10 A) is drawn through the DP and DM lines. The power
consumption through pin V
Pins VBUSDET and RCV are driven to LOW to indicate this mode. The VBUSDET
function is ignored during suspend mode of the ISP1102.
Some hysteresis is built into the detection of VREG3V3 lost.
Table 6.
[1]
Table 7.
Pin
V
VREG3V3
V
VPU3V3
DP, DM
VP/VPO, VM/VMO
RCV
VBUSDET
OE, SUSPEND, SOFTCON
V
Connected
< 3.6 V
CC(5V0)
CC(I/O)
CC(5V0)
VP/VPO and VM/VMO are bidirectional pins.
Pin states in sharing mode
Power supply configuration overview
[1]
Configuration
normal mode
sharing mode
CC(I/O)
Rev. 05 — 11 December 2007
is connected only, V
CC(I/O)
drops to the low-power (suspended) state level.
Special characteristics
-
DP, DM and VPU3V3 high-Z; VBUSDET is driven LOW
Sharing mode
< 3.6 V
< 2.4 V
1.65 V to 3.6 V input
high-Z (off)
high-Z
high-Z
LOW
LOW
high-Z
CC(5V0)
is < 3.6 V and VREG3V3 is < 2.4 V.
Advanced USB transceiver
© NXP B.V. 2007. All rights reserved.
ISP1102
6 of 25