ISP1102W-T NXP Semiconductors, ISP1102W-T Datasheet - Page 5

• Manufacturer Part Number: ISP1102W-T
• Description: RF Transceiver USB FULL SPD TRNSCVR
• Manufacturer: NXP Semiconductors

Specifications of ISP1102W-T

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Operating Supply Voltage (typ): Not RequiredV
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): Not RequiredV
• Operating Supply Voltage (min): Not RequiredV
• Pin Count: 16
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: HBCC-16
• Maximum Data Rate: 12 Mbps
• Maximum Supply Current: 2 mA, 8 mA
• Minimum Operating Temperature: - 40 C
• Protocol Supported: USB 2.0
• Lead Free Status / RoHS Status: Compliant
• Other names: ISP1102W,118

NXP Semiconductors
Table 2.
[1]
ISP1102_5
Product data sheet
Symbol
SUSPEND
n.c.
V
VBUSDET
DM
DP
n.c.
n.c.
n.c.
VREG3V3
V
VPU3V3
SOFTCON
GND
CC(I/O)
CC(5V0)
Symbol names with an overscore (for example, OE) indicate active LOW signals.
[1]
Pin description
Pin
HBCC16
5
6
7
8
9
10
11
12
-
13
14
15
16
exposed
die pad
…continued
HVQFN14
5
-
6
7
8
9
-
-
10
11
12
13
14
exposed
die pad
Type
I
-
-
O
AI/O
AI/O
-
-
-
-
-
-
I
-
Rev. 05 — 11 December 2007
Description
suspend input (CMOS level with respect to V
low-power state while the USB bus is inactive and drives output RCV to a
LOW level
input pad; push pull; CMOS
not connected
supply voltage for digital I/O pins (1.65 V to 3.6 V). When V
connected, the DP and DM pins are in 3-state. This supply pin is totally
independent of V
VREG3V3 voltage.
V
V
VBUSDET = LOW; when SUSPEND = HIGH, the VBUSDET function is
invalid
output pad; push pull; 4 mA output drive; CMOS
negative USB data bus connection (analog, differential)
positive USB data bus connection (analog, differential)
not connected
not connected
not connected
internal regulator option: regulated supply voltage output
(3.0 V to 3.6 V) during 5 V operation; a decoupling capacitor of at least
0.1 F is required
regulator bypass option: used as a supply voltage input (3.3 V
for 3.3 V operation
internal regulator option: supply voltage input (4.0 V to 5.5 V); can be
directly connected to USB line V
regulator bypass option: connect to VREG3V3
pull-up supply voltage (3.3 V
on DP (full-speed)
This pin function is controlled by the SOFTCON input:
SOFTCON = LOW — VPU3V3 floating (high-Z); ensures zero pull-up
current
SOFTCON = HIGH — VPU3V3 = 3.3 V; internally connected to
VREG3V3
software controlled USB connection input; a HIGH level applies 3.3 V to
pin VPU3V3, which is connected to an external 1.5 k pull-up resistor;
this allows USB connect or disconnect signaling to be controlled by
software
input pad; push pull; CMOS
ground supply; down bonded to the exposed die pad (heat sink); to be
connected to the PCB ground
BUS
BUS
indicator output (CMOS level with respect to V
> 4.1 V, VBUSDET = HIGH and when V
CC(5V0)
and VREG3V3 and must never exceed the
10 %); connect an external 1.5 k resistor
BUS
Advanced USB transceiver
CC(I/O)
BUS
< 3.6 V,
); a HIGH level enables
CC(I/O)
© NXP B.V. 2007. All rights reserved.
ISP1102
); when
CC(I/O)
is not
10 %)
4 of 25