PIC24FJ64GA110-I/PT Microchip Technology, PIC24FJ64GA110-I/PT Datasheet - Page 59

• Manufacturer Part Number: PIC24FJ64GA110-I/PT
• Description: 16-bit, 16 MIPS, 64KB Flash, 16Kb RAM, 84 I/O, NanoWatt 100 TQFP 12x12x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ64GA110-I/PT

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 64KB (22K x 24)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP
• Processor Series: PIC24FJ256GA110
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: UART, I2C, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 3.6 V
• Maximum Operating Temperature: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 5-1:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-7
bit 6
bit 5-4
bit 3-0
Note 1:
R/SO-0
WR
U-0
—
2:
3:
(1)
These bits can only be reset on POR.
All other combinations of NVMOP<3:0> are unimplemented.
Available in ICSP™ mode only. Refer to the device programming specification.
WR: Write Control bit
1 = Initiates a Flash memory program or erase operation. The operation is self-timed and the bit is
0 = Program or erase operation is complete and inactive
WREN: Write Enable bit
1 = Enable Flash program/erase operations
0 = Inhibit Flash program/erase operations
WRERR: Write Sequence Error Flag bit
1 = An improper program or erase sequence attempt or termination has occurred (bit is set
0 = The program or erase operation completed normally
Unimplemented: Read as ‘0’
ERASE: Erase/Program Enable bit
1 = Perform the erase operation specified by NVMOP<3:0> on the next WR command
0 = Perform the program operation specified by NVMOP<3:0> on the next WR command
Unimplemented: Read as ‘0’
NVMOP<3:0>: NVM Operation Select bits
1111 = Memory bulk erase operation (ERASE = 1) or no operation (ERASE = 0)
0011 = Memory word program operation (ERASE = 0) or no operation (ERASE = 1)
0010 = Memory page erase operation (ERASE = 1) or no operation (ERASE = 0)
0001 = Memory row program operation (ERASE = 0) or no operation (ERASE = 1)
R/W-0
R/W-0
ERASE
WREN
cleared by hardware once the operation is complete.
automatically on any set attempt of the WR bit)
NVMCON: FLASH MEMORY CONTROL REGISTER
(1)
(1)
SO = Set Only bit
W = Writable bit
‘1’ = Bit is set
R/W-0
WRERR
U-0
—
(1)
(1)
(1)
PIC24FJ256GA110 FAMILY
U-0
U-0
—
—
(1)
(1)
(1,2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
NVMOP3
R/W-0
U-0
—
(1)
(2)
NVMOP2
R/W-0
U-0
—
(1)
(2)
x = Bit is unknown
NVMOP1
R/W-0
U-0
—
(3)
(1)
(2)
DS39905E-page 59
NVMOP0
R/W-0
U-0
—
(1)
bit 8
bit 0
(2)