LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 148

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
10.2.3.5
10.2.3.6
EECLK
EEDO
EECS
EEDI
EECLK
EEDO
EECS
EEDI
EWEN (Erase/Write Enable)
This command enables the EEPROM for erase and write operations. The EEPROM will allow erase
and write operations until the EWDS command is sent, or until power is cycled.
Note: The EEPROM will power-up in the erase/write disabled state. Any erase or write operations
READ (Read Location)
This command will cause a read of the EEPROM location pointed to by the EPC_ADDRESS field of
the
Register
EEPROM Command Register
will fail until an EWEN command is issued.
(E2P_DATA).
1
1
1
Figure 10.10 EEPROM EWEN Cycle
Figure 10.11 EEPROM READ Cycle
0
0
(E2P_CMD). The result of the read is available in the
DATASHEET
Ax
0
148
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
1
A0
1
D7
SMSC LAN9311/LAN9311i
D0
EEPROM Data
Datasheet