UJA1066TW/5V0,518 NXP Semiconductors, UJA1066TW/5V0,518 Datasheet - Page 64

• Manufacturer Part Number: UJA1066TW/5V0,518
• Manufacturer: NXP Semiconductors

Specifications of UJA1066TW/5V0,518

• Number Of Transceivers: 1
• Power Down Mode: Sleep/Standby
• Standard Supported: ISO 11898-2
• Operating Supply Voltage (min): 5.5V
• Operating Temperature (max): 125C
• Operating Temperature (min): -40C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

NXP Semiconductors
UJA1066_2
Product data sheet
13.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 28.
Table 29.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
≥ 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 28
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
All information provided in this document is subject to legal disclaimers.
29
25.
Rev. 03 — 17 March 2010
Package reflow temperature (°C)
Volume (mm
< 350
235
220
Package reflow temperature (°C)
Volume (mm
< 350
260
260
250
3
3
)
)
High-speed CAN fail-safe system basis chip
Figure
350 to 2000
260
250
245
25) than a SnPb process, thus
≥ 350
220
220
245
> 2000
260
245
UJA1066
© NXP B.V. 2010. All rights reserved.
64 of 70