9015 JEWELL / MODUTEC, 9015 Datasheet - Page 7

• Manufacturer Part Number: 9015
• Description: MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT
• Manufacturer: JEWELL / MODUTEC

Specifications of 9015

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 1000
• Voltage Measuring Range Ac: 750
• Current Measuring Range Dc: 2mA To 10A
• Current Measuring Range Ac: 20mA To 10A
• Lead Free Status / RoHS Status: na

2.44 Avoid usage near strong RF fields (radio or television transmitters, walkie
2.45 Remove the battery when the meter may be left unused for longer than 1
2.46 Do not use the meter if there is evidence of chemical leakage from the
2.47 Observe whether HOLD function is activated. The meter may not show the
2.48 Do not attempt to test charged capacitors. Only discharged capacitors may
2.49 Do not use the thermocouple to measure the temperature of objects that
2.50 Do not attempt to measure the hFE of a transistor with the meter’s
2.51 Do not attempt to measure capacitance with test leads connected to
talkies, cellular phones, etc.). The meter may display readings that are in
error, causing the user to misinterpret the hazards present. For example,
the meter may indicate a low voltage when high voltages are actually
present. Failure to observe this precaution may result in damage to
the meter or injury to the user.
month. Chemical leakage from the battery could damage the meter,
leading to user injury.
battery. Leakage could damage meter and lead to injury of user.
presence of dangerous potentials when HOLD is activated. For example,
if HOLD is applied when the meter is reading zero, and 120VAC is
subsequently applied, the meter will continue to read zero. Failure to
observe this precaution may result in damage to the meter or injury to
the user.
be tested. If you wish to test a capacitor, discharge it using an approved
method before connecting it to the meter. Caution: Some capacitors can
store dangerous lethal charges. Discharging these capacitors can be
dangerous unless an approved method is used. Failure to observe this
precaution may result in damage to the meter or injury to the user.
are electrically “live”. Failure to observe this precaution may result in
damage to the meter or injury to the user.
test leads connected. Failure to observe this precaution may result in
injury to the user.
the input banana jacks of the meter. Failure to observe this precaution
may result in injury to the user.
6