DS26528 Maxim Integrated Products, DS26528 Datasheet - Page 11

• Manufacturer Part Number: DS26528
• Description: Network Controller & Processor ICs Octal E1-T1-J1 Singl e-Chip Transceiver (
• Manufacturer: Maxim Integrated Products

Specifications of DS26528

• Product: Framer
• Number Of Transceivers: 8
• Supply Voltage (max): 3.465 V
• Supply Voltage (min): 3.135 V
• Supply Current (max): 875 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Package / Case: TE-CSBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.6
Detailed alarm and status reporting with optional interrupt support
Large path and line error counters
−
−
−
DS1 Idle Code Generation on a per-channel basis in both transmit and receive paths
−
−
ANSI T1.403-1999 support
G.965 V5.2 link detect
Ability to monitor one DS0 channel in both the transmit and receive paths
In-band repeating pattern generators and detectors
−
−
Bit-oriented code (BOC) support
Flexible signaling support
−
−
−
−
Automatic RAI generation to ETS 300 011 specifications
RAI-CI and AIS-CI support
Expanded access to Sa and Si bits
Option to extend carrier loss criteria to a 1ms period as per ETS 300 233
Japanese J1 support
Ability to calculate and check CRC-6 according to the Japanese standard
Ability to generate Yellow Alarm according to the Japanese standard
T1-to-E1 conversion
System Interface
Independent two-frame receive and transmit elastic stores
Independent control and clocking
Controlled slip capability with status
Minimum delay mode supported
Flexible TDM backplane supports bus rates from 1.544MHz to 16.384MHz
Supports T1 to CEPT (E1) conversion
Programmable output clocks for fractional T1, E1, H0, and H12 applications
Interleaving PCM bus operation
Hardware signaling capability
Receive-signaling reinsertion to a backplane multiframe sync
Availability of signaling in a separate PCM data stream
Signaling freezing
Ability to pass the T1 F-bit position through the elastic stores in the 2.048MHz backplane mode
User-selectable synthesized clock output
T1: BPV, CV, CRC-6, and framing bit errors
E1: BPV, CV, CRC-4, E-bit, and frame alignment errors
Timed or manual update modes
User defined
Digital Milliwatt
Three independent generators and detectors
Patterns from 1 to 8 bits or 16 bits in length
Software or hardware based
Interrupt generated on change of signaling data
Optional receive-signaling freeze on loss of frame, loss of signal, or frame slip
Hardware pins provided to indicate loss of frame (LOF), loss of signal (LOS), loss of transmit clock
(LOTC), or signaling freeze condition
11 of 276
DS26528 Octal T1/E1/J1 Transceiver