NSH5-422UL-10M Omron, NSH5-422UL-10M Datasheet - Page 66

• Manufacturer Part Number: NSH5-422UL-10M
• Description: 10m RS422 Cable For NSH5
• Manufacturer: Omron

Specifications of NSH5-422UL-10M

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

USB Port
3-6
3-6-1
3-7
44
USB Port
Usable Host Connection Methods
Connecting to the USB Port
Note
The USB port can be used to transfer screens created by the CX-Designer.
For details, refer to the NS Series Setup Manual (Cat. No. V083-E1).
Open the cover on top of the PT, as shown in the following diagram, and con-
nect a commercially available USB cable to the USB port. (For details on
opening the cover, refer to 3-5 Memory Cards.)
The NSH5 has one serial port corresponding to serial port A in the NS Series,
for connecting to the PLC. Unlike with the NS Series, it is not possible to con-
nect using serial port B, the Ethernet port, or Controller Link. When using CX-
Designer to set the connection method, do not set any communications ports
other than serial port A.
The communications methods shown in the following table can be set, using
the serial port.
The PT can also communicate with the following products:
1:N NT Link
1:1 NT Link
Host Link
(1) Only one NSH5 can be connected to any one communications port on the
(2) Only PT memory can be allocated as the notification destination for the
• Mitsubishi FX-series, A-series, and Q-series PLCs
• SIEMENS S7-300-series PLCs
• Yaskawa MP-series Machine Controllers
• Yaskawa Varispeed F7-series and VS mini V7-series Inverters
• Rockwell Automation (Allen-Bradley) SLC500, MicroLogix, PLC-5, Com-
• Products supporting Modbus RTU
pactLogix, and ControlLogix Controllers
Host connection method
PLC. More than one PT cannot be connected at the same time.
emergency stop switch and function switches F3 to F5 and F8 to F10.
Host allocations are not possible.
OK (See note 1.)
OK
OK
(Host Link OK with restrictions) (See note 2.)
Usability
Section 3-6