ACD-330T Amprobe, ACD-330T Datasheet - Page 16

• Manufacturer Part Number: ACD-330T
• Description: DMM CLAMP-ON W/BACKLIGHT
• Manufacturer: Amprobe
• Type: Digital (DMM)r

Specifications of ACD-330T

• Includes: Battery, Case, Test Leads
• Style: Clamp
• Display Digits: 4
• Display Type: LCD, Bar Graph
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, Diode Test
• Features: Auto Off, Backlight, Hold, Min/Max/Ave
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Display Count: -
• Other names: 2730749

The dynamic recording mode can be used to catch intermittent and turn on or turn off
operating the equipment under test and can not watch the meter. Refer to Figure 7.
2) Press this button momentarily to cycle through maximum, minimum,average and
5) In dynamic recording, the auto power off feature is disabled and the " Off" turns off.
7) The record speed of dynamic recording is about 100 milli-seconds (0.1 second).
surges, verify performance, measure while you are away, or take readings while you are
The average reading is useful for smoothing out unstable or changing inputs, estimating
the percent of time a circuit is operational, or verifying circuit performance.
The operational procedures are described below:
1 ) Press and hold the "MAX * MIN"pushbutton to toggle recording mode on or off. The
3) The beeper sounds when a new maximum or minimum value is recorded.
4) If an overload is recorded the averaging function is stopped. An average
6) By selecting dynamic recording in the auto range, the meter will record the value
8) The average value is the true average of all measured values taken since the
dynamic recording mode is indicated when the MAX AVG MIN annunciator turns on.
The present value is stored to memories of maximum, minimum and average.
DYNAMIC RECORDING
present readings. The MAX, MIN, AVG annunciator turns on respectively
to indicate what value is being displayed. See Figure 3)
value becomes " OL"(overload).
of MAX, MIN or AVG for different ranges.
recording mode was entered.
12