MTCMR-C1-GP-N3 Multi-Tech Systems, MTCMR-C1-GP-N3 Datasheet - Page 69

• Manufacturer Part Number: MTCMR-C1-GP-N3
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N3

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Verizon™ Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1097

Examples:
Wavecom Device Services Configuration +WDSC
Description:
Syntax:
Values:
Parameter Storage:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
Example 1:
Example 2:
This Wavecom proprietary command allows a user to configure:
•
•
Command syntax: AT+WDSS=<Mode>,[<State> || <Config>]
<Mode>
<State>
<Config>
Command
<Mode>= 0, 1, 2, 3
AT+WDSC=<Mode>,<State>
<Mode>= 5
AT+WDSC=<Mode>,<Config>
AT+WDSC?
AT+WDSC=?
The user agreement for connection, package download and package install
The mode of automatic registration to the IDS server
0
1
2
3
4
5
0
1
0
1
Client-initiated device configuration request, no errors
AT+WDSS=1,1
OK
+WDSI: 4
+WDSI: 6
+WDSI: 8
Client-initiated device configuration request, authentication error
AT+WDSS=1,1
OK
+WDSI: 4
+WDSI: 5
User agreement for connection
When this mode is activated and when a notification SMS is received by the
modem, an indication (see +WDSI indication) is returned by the modem to
request an agreement before connecting to the IDS server.
User agreement for package download
When this mode is activated, an indication (see +WDSI indication) is returned by
the modem to request an agreement before downloading any package.
User agreement for package install
When this mode is activated, an indication (see +WDSI indication) is returned by
the modem to request an agreement before installing any package.
Not Supported
Not Supported
Registration configuration
The registration is performed using +WDSS command.
Status of the mode (Only for <Mode>= 0, 1, 2)
Disabled (default value)
Enabled
Status of the Registration configuration (Only for <Mode>= 5)
Not configured (default value)
Configured
<State> and <Config> parameters are stored in flash without using &W
command. &F has no effect on these parameters.
Possible Responses
OK
Note: No connection to the server and the used PDP context
for the next connection is the one defined by the provisioning.
+WDSC: 0,<State>
+WDSC: 1,<State>
+WDSC: 2,<State>
+WDSC: 5,<Config>
OK
+WDSC: (list of supported<Mode>s), (list of supported
[<State>s ]<Config>]
OK
Chapter 13 – OMA / DM Control Commands
69