MTCMR-C1-GP-N3 Multi-Tech Systems, MTCMR-C1-GP-N3 Datasheet - Page 67

• Manufacturer Part Number: MTCMR-C1-GP-N3
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N3

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Verizon™ Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1097

Wavecom Device Services Wavecom +WDSW
Description:
Syntax:
Values:
Parameter Storage:
Note:
Wavecom Device Services Indications +WDSI
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This Wavecom proprietary command allows carrier- or customer-specific configuration of Device
Services.
Command Syntax: AT+WDSW=<Operation>,<Action>
<Operation>
<Action>
The auto-registration operation is available for only for modem configured for the Sprint network.
This Wavecom proprietary command allows a user to select which Device Services events are
reported. Device Services events are reported through the +WDSI unsolicited response.
Command Syntax: AT+WDSI=<Level>
<Level>
Command
AT+WDSW=?
AT+WDSW=12,0
Note: Clear auto-registration complete
AT+WDSW=12,1
Note: Mark auto-registration complete
AT+WDSW?
Note: Display auto-registration state
AT+WDSW?
Note: Display auto-registration state
Command
AT+WDSI?
AT+WDSI=?
AT+WDSI=8388607
Note: Enable all Device Services event notifications
AT+WDSI
Note: Enable all Device Services event notifications
(default)
+WDSI: <Event>[,<Data>]
Note: Unsolicited response
0
1 (bit 0)
2 (bit 1)
4 (bit 2)
8 (bit 3)
16 (bit 4)
32 (bit 5)
64 (bit 6)
12
0
1
Auto-registration. This operation allows auto-registration status to be set or
cleared. The Service Provisioning Code must be entered using the +WSPC
command prior to attempting to set or clear auto-registration.
Clear auto-registration. Auto-registration will be attempted after the next power
cycle.
Mark auto-registration complete. No further auto-registration attempts will be
made.
Parameters are stored in flash without using the AT&W command. AT&F has no
effect on these parameters.
Indications level, bit field (default value = 0)
bit set to 0: indication deactivated
bit set to 1: indication activated
No indication
Reserved
Reserved
Activate the authentication indications (<Event> = 4 & 5)
Activate the session start indication (<Event> = 6, 7 & 8)
Activate the package download indications (<Event> = 9, 10 & 11)
Reserved
Activate the update indications (<Event> = 14, 15 & 16)
Possible Responses
ERROR
OK
OK
+WDSW: 12,1
Note: Auto-registration is complete
+WDSW: 12,0
Note: Auto-registration is incomplete.
Chapter 13 – OMA / DM Control Commands
Possible Responses
+WDSI: <Level>
OK
+WDSI: (0-8388607)
OK
OK
OK
OK
67