MTCMR-C1-GP-N3 Multi-Tech Systems, MTCMR-C1-GP-N3 Datasheet - Page 24

• Manufacturer Part Number: MTCMR-C1-GP-N3
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N3

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Verizon™ Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1097

Cellular Result Codes +CRC
Description:
Syntax:
Phone Activity Status +CPAS
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command gives more detailed ring information for an incoming call. Instead of the string
“RING”, an extended string is used to indicate which type of call is ringing (e.g., +CRING:0).
These extended indications are:
Command syntax: AT+CRC
This command returns the activity status of the mobile equipment.
Command syntax: AT+CPAS
<pas>
+CRING: 0
+CRING: 1
+CRING: 2
+CRING: 3
+CRING: 5
+CRING: 6
+CRING: 7
+CRING: 8
Command
AT+CRC=0
Note: Extended reports disabled
AT+CRC=1
Note: Extended reports enabled
AT+CRC=?
Note: Show range
AT+CRC?
Note: Show current value
Command
AT+CPAS
Note: Current activity status
0
1
2
3
4
5
6
ready (allow commands from TA/TE)
unavailable (does not allow commands)
unknown
ringing (ringer is active)
call in progress
Not supported, asleep (low functionality)
corrupted RF calibration values (checksum mismatch)
Normal voice calls
Circuit switched data calls
Packet switched data calls
SMS calls
For markov, loopback, and test calls
For OTAPA calls
For standard OTASP calls
For non-standard OTASP calls
Possible Responses
+CPAS: <pas>
OK
Possible Responses
OK
Note: Command valid
OK
Note: Command valid
+CRC: (0-1)
OK
+CRC: 1
OK
Chapter 7 – Status Commands
24