ADUC7036DCPZ-RL Analog Devices Inc, ADUC7036DCPZ-RL Datasheet - Page 73

• Manufacturer Part Number: ADUC7036DCPZ-RL
• Description: SFlash 96k ARM7 Dual 16-Bit ADC LIN I.C.
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7036DCPZ-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 115°C
• Package / Case: 48-VFQFN Exposed Pad, CSP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Starting Timer2
When starting Timer2, it is recommended to first load Timer2
with the required TxLD value. Next, start the timer by setting
the T2CON bits as required. This enables the timer, but only
once the T2CON bits have been latched internally in the
Timer2 clock domain. Therefore, it is advised that a delay of
more than three clock periods (that is, 100 μs for a 32 kHz timer
clock source) is inserted to allow both the T2LD value and the
Example Code
T2LD = 0x1;
T2CON = 0x02CF;
Delay(100us);
T2CLRI = 0 ;
IRQEN = WAKEUP_TIMER_BIT;
//Reload Timer
//Enable T2—Low Power
//Include Delay to ensure T2CON bits take effect
//*ClearTimerIrq
//Unmask Timer2
Rev. C | Page 73 of 132
Osc, 32768 prescaler
T2CON value to be latched through the synchronization logic
and reach the Timer2 domain.
After the delay, it is recommended that any (inadvertent)
Timer2 interrupts are now cleared using T2CLRI=0x00. Finally,
the Timer2 system interrupt can be unmasked by setting the
appro-priate bit in the IRQEN MMR. An example of this code
is as follows, where the assumption is that Timer2 is halted:
ADuC7036