DLP-245SY-G-C DLP Design Inc, DLP-245SY-G-C Datasheet - Page 8

• Manufacturer Part Number: DLP-245SY-G-C
• Description: Interface Modules & Development Tools USB/Micro Dev Board W/GRICH C COMPILER
• Manufacturer: DLP Design Inc

Specifications of DLP-245SY-G-C

• Interface Type: USB
• Data Bus Width: 8 bit
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: SX48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TOKEN I/O COMMAND SET
0xA5 – Line In – Reads the state of a single port pin
Parameters:
Returns:
Function:
Example:
0xA6 – Line Out - Sets a single port pin high or low
Parameters:
Returns:
Function:
Example:
0xA7 – Return Board ID
Parameters:
Returns:
Function:
Example:
0xAA – EEPROM Read
Parameters:
Returns:
Function:
Example:
Port – Select from available port pins (PIN_A3, PIN_B0, etc)
1 Byte: State of the port pin (0 or 1)
This function will read the state of a single port pin. If the data direction for the
pin selected was set to output, the direction is first set to input.
0x2, 0xA5, 0xA3, 0x3 - Reads the current state of port pin PIN_A3.
Port – Select from available port pins (PIN_A3, PIN_B3, etc)
State – 0 or 1
Undefined
This function will change the output state of a single port pin. If the data direction
for the pin selected was set to input, the direction is first set to output.
0x3, 0xA6, 0xA3, 0x1, 0x7 – Sets port pin PIN_A3 high.
None
5 bytes: “245SY”
This function will return the ID of the 245xx board currently opened.
0x1, 0xA7, A6 – Reads the board ID.
Address – Selects the zero-based address of the location in the EEPROM for
reading.
1 Byte: The byte of data read from the EEPROM.
This function will read the selected location in the EEPROM.
0x2, 0xAA, 0x2, 0xAA – Reads EEPROM Address 2, and returns a single byte of
data.
8