0199000019 Fair-Rite, 0199000019 Datasheet - Page 38

• Manufacturer Part Number: 0199000019
• Description: BEAD KIT, EMI SUPPRESSION
• Manufacturer: Fair-Rite

Specifications of 0199000019

• Kit Contents: Contains 28 Different Beads In Three Suppression Materials, 73, 43 And 61.
• Component Type: Shield Bead Kit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Surface mount PC Beads are supplied in two suppression materials. SMPC Beads are available for 3, 4 and
5 line designs in the high resistivity 44 material for broadband applications and for the higher frequencies in
the new 52 material grade.
Surface mount PC Beads are supplied taped and reeled on 13” reels per EIA 481 and IEC 60286 standards.
These beads can also be supplied not taped and reeled and then are bulk packed. This packing method will
change the last digit of the part number to a “6”.
•
• The SMPC Beads can withstand a minimum breakdown voltage of 750 Vdc between wires. Leads co-planarity is < 0.10 mm (.004”).
• SMPC Beads are controlled for impedance only. The impedances listed are typical values. Minimum impedance values are specified for
• SMPC Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208.
• After preheating the SMPC Beads to within 100
• Recommended storage and operating temperature range is -55
• Suggested land patterns are in accordance with the latest revision of IPC-7351.
• The maximum current rating for the SMPC Beads is 5 amps. The flat wire cross-sectional area is 5% less than the 24 AWG wire size.
• For equivalent PC Beads for through hole designs see pages 36 and 37.
• Performance curves of all SMPC Beads are compiled on the Fair-rite Products CD-ROM.
• Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
PC Beads (Surface Mount)
F a ir-R it e Prod uct s C o rp .
Phone:
SMPC Beads can be supplied with same size copper conductors but with a tin/lead coating. See page 28 for suggested solder profile for
lead-free components
the + marked frequencies.
The minimum guaranteed impedance is the listed impedance less 20%.
The 44 material beads are measured on the 4193A vector Impedance Analyzer. The 52 beads are tested for impedance on the
4191A RF Impedance Analyzer.
requirements of EIA-186-10E, temperature 260 +/- 5
The flat wire conductors are oxygen free high conductivity copper, 0.30 x 0.65 mm (.012 x .025”), and a lead-free tin coating. If required
(888) FAIR RITE / [phone] • FAX: (888) FERRITE / [phone]
[phone]
o
(888) 337 -7483
C of the soldering temperature, the beads will meet the resistance to soldering
o
C and time of 10 +/- 1 seconds.
o
C to 125
o
C.
• www.fair-rite.com
• E-Mail: [e-mail]
PO Box J, One Commercial Row, Wallkill, NY 12589-0288