CRT1-ID08SL Omron, CRT1-ID08SL Datasheet - Page 133

• Manufacturer Part Number: CRT1-ID08SL
• Description: 8 In NPN Cage Clamp
• Manufacturer: Omron

Specifications of CRT1-ID08SL

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Connecting External I/O for Slave Units
1,2,3...
1. Using a fine flat-bladed screwdriver, open the hooks at both ends of the
2. Insert the Flat Cable between the separated Socket sides, line it up with
3. Bend back the cable as required, insert a Strain Relief, and lock the cable
MIL Socket and separate the contact side and the cover side. There are
two latches at each end of the Socket (i.e., the contact side, and altogether
four laches). Release the bottom laches on both sides at the same time,
and then release the upper two. Do not attempt to release two latches on
one side without releasing the latches on the other side.
the contacts, align the contact side with the cover side, and lock them in
place. Use an object such as a vise to firmly press them together until they
mesh with the latches.
Applicable wires for pressure-welding: 1.27-mm pitch Flat Cable (7-strand)
in place.
XG4M-1031-T/1030-T/1630-T/2030-T
XG4M-4030-T
• UL2651 (Standard cable)
• UL20012 (Folding cable)
• UL20028 (Color-coded cable)
Section 3-6
109