CV500BSC51 Omron, CV500BSC51 Datasheet - Page 14

• Manufacturer Part Number: CV500BSC51
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BSC51

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
Application Precautions
Application Precautions
!WARNING
!Caution Failure to abide by the following precautions could lead to faulty operation of
Observe the following precautions when using the GP-IB Interface Unit or the
PLC.
Failure to abide by the following precautions could lead to serious or possibly
fatal injury. Always heed these precautions.
the PLC or the system or could damage the PLC or PLC Units. Always heed
these precautions.
• Always ground the system to 100
• Always turn OFF the power supply to the PLC before attempting any of
• Take measures to stabilize the power supply to conform to the rated sup-
• Provide circuit breakers and other safety measures to provide protection
• Always disconnect the LG terminal when performing withstand voltage
• Do not attempt to take any Units apart, to repair any Units, or to modify
• Be sure to tighten Backplane screws, bus and connecting unit mounting
• Leave the label attached to the Unit when wiring. Removing the label may
• Remove the label after the completion of wiring to ensure proper heat dis-
• Use crimp terminals for wiring. Do not connect bare stranded wires
• Double-check all wiring and switch settings before turning ON the power
• Install and wire all Units according to instructions in the operation manu-
• When transporting the Unit, pack it in the special box provided in which it
protect against electrical shock.
the following. Performing any of the following with the power supply turned
ON may lead to electrical shock:
ply (e.g., voltage and frequency) if it is not stable.
against shorts in external wiring.
tests.
any Units in any way.
screws, terminal screws, and cable connector screws to the torque speci-
fied in operation manuals.
result in malfunction if foreign matter enters the Unit.
sipation. Leaving the label attached may result in malfunction.
directly to terminals. Connection of bare stranded wires may result in
burning.
supply. Incorrect wiring may result in burning.
als. Improper installation may cause faulty operation.
was originally shipped and do not allow it to be subjected to vibration or
shock during transportation.
• Mounting or removing any Units (e.g., I/O Units, CPU Unit, Power Sup-
• Assembling any devices or racks.
• Changing DIP switch or rotary switch settings.
• Connecting or disconnecting any cables or wiring.
ply Unit, etc.) or Memory Cassettes.
or less when installing the system to
xv
5