SP100R BANNER ENGINEERING, SP100R Datasheet - Page 8

• Manufacturer Part Number: SP100R
• Description: PHOTO SENSOR RECEIVER
• Manufacturer: BANNER ENGINEERING

Specifications of SP100R

• Output Current: 150mA
• Sensor Output: NPN Open Collector
• Supply Voltage Range Dc: 10V To 30V
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No

8
Range: 12 inches (30cm) both models
Housing material (SP300D):
Universal Mounting
Bracket for
SP300 Sensors
Range: focus at 3.8 inches (96mm)
Temp. range: -40 to +80 degrees C
Housing material: black anodized
aluminum
Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers
Sensors are epoxy-encapsulated. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order.
green anodized aluminum
SP1000V
SMB300
SP300D
Models/Dimensions
CONVERGENT Mode
Temp. range: -40 to +80 C both
models
Housing material (SP320D):
black VALOX
SP320D
®
SP300D: the SP300D is the diffuse mode version of the SP300L with the same
rugged aluminum housing and totally encapsulated construction. The glass
lenses are hermetically sealed, which eliminates any possibility of condensa-
tion inside the lenses and allows operation in adverse environments like steam
washdown and high vibration. The SP300D may be mounted by its through-
holes or with the SMB300 bracket, as shown below.
SP320D: model SP320D is identical to the SP300D, except for its housing.
The 320 is a miniature plastic package, designed to fit into very tight locations.
It mounts using two #4 (3mm) screws. The SP320D and the SP300D are
excellent for nearly any presence sensing application.
Accessory bracket model SMB300 is designed for 2-axis universal
mounting of sensor models SP300EL, SP300RL, SP300L, and SP300D.
These sensors are affixed to the SMB300 with two #6 (3,5mm) screws.
The bracket, in turn, mounts with two #10 (5mm) screws.
In addition, as indicated by the dimension drawing, the SMB300 has a
clearance slot for mounting LR400, PT400, and LP400WB barrel
sensors. LR & PT200 sensors may be mounted with the SMB300, using
its 7/16-20 threaded hole and steel jam nut, which is supplied with the
sensors. LR250 and PT250 sensors may be used with the SMB300 when
the SMB250 block is used. Also, two SMB250 blocks may be attached
to the SMB300 bracket and angled to mechanically converge an LR &
PT250 sensor pair.
The SP1000V is a convergent mode sensor that produces a very small 0.1
inch (2,5mm) diameter sensing image at a point exactly 3.8 inches (96mm)
from its glass lenses. As the excess gain curve illustrates, the SP1000V has
a very sharp drop-off of gain beyond the focus point. This feature makes it
an excellent choice for detecting a small part which is only a fraction of an
inch in front of another surface, such as parts on a conveyor (viewed from
above). It is also ideal for fill level detection and for precise positioning
control, in lieu of opposed sensing.
DIFFUSE
Mode
E
X
C
E
S
S
G
A
I
N
E
X
C
E
S
S
G
A
I
N
I
I
1000
1000
100
10
100
Excess Gain
10
.1 IN
1
.1 IN
1
SP300D, SP320D
SP1000V
1 IN
1 IN
DISTANCE
DISTANCE
10 IN
10 IN
100 IN
100 IN
I
N
C
H
E
S
I
N
C
H
E
S
DISTANCE TO 90% WHITE TEST CARD--INCHES
.090
.060
.030
.030
.060
.090
Beam Pattern
DISTANCE TO 90% WHITE TEST CARD--INCHES
0
.6
.4
.2
.2
.4
.6
0
0
0
3
1
6
2
SP300D, 320D
9
3
SP1000V
4
12
15
5