SP100R BANNER ENGINEERING, SP100R Datasheet - Page 19

• Manufacturer Part Number: SP100R
• Description: PHOTO SENSOR RECEIVER
• Manufacturer: BANNER ENGINEERING

Specifications of SP100R

• Output Current: 150mA
• Sensor Output: NPN Open Collector
• Supply Voltage Range Dc: 10V To 30V
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No

MICRO-AMP
MPS-15 and MPS-15-230 Power Supplies
Specifications
SUPPLY VOLTAGE: model MPS-15 is for 105 to 130V ac (50/
60Hz); model MPS-15-230 is for 210 to 250V ac (50/60Hz).
OUTPUT CONFIGURATION: SPDT electromechanical relay.
Contact rating: 250V ac max., 30V dc max., 5 amps max. (resistive
load). Install MOV (metal oxide varistor) transient suppressor of
appropriate voltage across contacts used to switch inductive loads.
*Contact response: 20 milliseconds open and close.
Mechanical life: 10,000,000 operations.
*NOTE: dc loads may be easily connected directly to the output(s) of
the MICRO-AMP module used with the chassis in order to bypass the
MPS-15 Series power supplies are designed specifically to supply power for the Banner
MICRO-AMP series amplifiers and logic modules. They are constructed on small
PC boards that are track-mountable for compatibility with other track-mounted MICRO-
AMP components. The MPS-15 includes a socket for a MICRO-AMP amplifier or logic
module. The combination of an MPS-15 series power supply and a MICRO-AMP
module makes a complete and compact sensing and/or control system.
A built-in 5-amp rated SPDT output relay is supplied for easy interfacing to an external
load or circuit. Its action is controlled by the outputs of a MICRO-AMP module which
is plugged into the on-board module socket. A switch on the PC board selects which
module output (normally open or normally closed) will activate the relay.
Two models are available. Model MPS-15 is for 120V ac operation. Model MPS-15-
230 is for 220/240V ac power. Up to three MICRO-AMP modules may be powered
by one MPS-15 power supply. A 4-inch (100mm) long mounting track is supplied
with each MPS-15.
accomodates the MPS-15 Series PC board plus the PC boards of two additional RS8
sockets to form a complete three-module MICRO-AMP sensing/logic system.
NOTE: for hookup of sensors or inputs to the module socket,
Hookup Diagram, MPS-15 & MPS-15-230
see the hookup diagram for the module used.
Optional 6-inch (150mm) track model TR100-6 neatly
®
System
relay and therefore take advantage of the 1 millisecond response time
of the module (see MICRO-AMP module specifications and hookup).
COMPATIBLE MODULES: models MA3, MA3A, MA3-4, MA4-
2, MA4G, MA4L, MA5. Do not plug modules with current-sourcing
PNP outputs (MA3P, MA3-4P, etc.) into the socket on the MPS-15.
POWER FOR EXTERNAL DEVICES: 40 milliamps is available
to power external 10 to 30V dc devices (e.g.- two additional MICRO-
AMP modules or two MINI-BEAM sensors, etc.).
OPERATING TEMPERATURE:
-40 to 70 degrees C (-40 to 158 degrees F).
Dimension Drawing, MPS-15 & MPS-15-230
19