SP100R BANNER ENGINEERING, SP100R Datasheet - Page 5

• Manufacturer Part Number: SP100R
• Description: PHOTO SENSOR RECEIVER
• Manufacturer: BANNER ENGINEERING

Specifications of SP100R

• Output Current: 150mA
• Sensor Output: NPN Open Collector
• Supply Voltage Range Dc: 10V To 30V
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No

MICRO-AMP
MA3-4 and MA3-4P Modulated Amplifiers
Banner MICRO-AMP
ers designed for use with the popular family of Banner high-performance remote
sensors. When these modulated remote sensors are used with the MA3-4 or MA3-4P,
their optical response is the same as when they are used with the larger MAXI-AMP™
CM Series modules.
These modules are powered by 10 to 30 volts dc. They feature the patented Banner
Alignment Indicator Device (AID™) signal strength LED. Sensor sensitivity is
adjustable via a top-mounted GAIN potentiometer. Circuitry is epoxy-encapsulated
and protected by a tough molded VALOX
these modules via the optional RS8 socket/wiring base, or the module may be mounted
directly to a printed circuit board.
The sensors which are used with these modules are totally encapsulated for durability and infinite life. Wide beam angles eliminate
alignment problems, and high optical gain permits reliable sensing under severe conditions.
MICRO-AMP MA3-4 Specifications
SUPPLY VOLTAGE: 10 to 30V dc at less than 20 milliamps
(exclusive of load); 10% maximum ripple.
OUTPUT CONFIGURATION: two open-collector NPN (current
sinking) transistor (solid-state) switches; one normally-open (light
operate) and one normally closed (dark operate). 150 milliamps
maximum, each output. Saturation voltage less than 0.5V dc at 10
milliamp load. Off-state leakage current less than 1 microamp.
RESPONSE SPEED: 1 millisecond ON and OFF.
REPEATABILITY: 0.3 millisecond.
SENSOR LEAD LENGTH: 30 feet (9m) maximum.
Model MA3-4P: PNP (current sourcing) output
Model MA3-4P has the same specifications and performance as the MA3-4 amplifier, except that the MA3-4P has complementary PNP outputs
in place of the MA3-4's NPN configuration.
OUTPUT: two PNP transistors, complementary outputs; one normally open (light operate) and one normally closed (dark operate). 150
milliamps maximum, each output. Saturation voltage less than 1V dc at 10 milliamps. Off-state leakage current less than 1 microamp.
Hookup Diagram, MA3-4P
Functional Schematic, MA3-4
®
module models MA3-4 and MA3-4P are modulated amplifi-
®
System
®
housing. Connections may be made to
ADJUSTMENT: GAIN adjustment (single-turn potentiometer; ad-
just with small flat-blade screwdriver).
INDICATOR:
(AID™) system lights a red LED indicator whenever the sensor "sees"
its own modulated light source, and pulses at a rate proportional to the
strength of the received light signal.
CONSTRUCTION: totally encapsulated plug-in package with
molded VALOX
OPERATING TEMPERATURE:
-40 to +70 degrees C (-40 to +158 degrees F).
Hookup Diagram, MA3-4
®
exclusive Banner Alignment Indicator Device
housing. Gold-flashed connection pins.
5