DP83816AVNG National Semiconductor, DP83816AVNG Datasheet - Page 85

• Manufacturer Part Number: DP83816AVNG
• Description: Ethernet Media Access Controller IC
• Manufacturer: National Semiconductor

Specifications of DP83816AVNG

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Mounting Type: Surface Mount
• Features: Physical Layer
• Package / Case: 144-LQFP
• Package: 144LQFP
• Standard Supported: IEEE 802.3|IEEE 802.3u|IEEE 802.3x
• Communication Mode: Full Duplex|Half Duplex
• Network Interface: MII
• Data Rate: 10|100 Mbps
• Host Interface: PCI
• Operating Supply Voltage: 3.3 V
• Loopback Mode: Internal
• Maximum Power Dissipation: 0.504 W
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.0 Buffer Management
rxDescRead
rxFIFOblock
rxDescWrite
rxFragWrite
rxDescRefr
rxAdvance
State
rxIdle
CR:RXE && !CRDD
XferDone && !OWN
CR:RXE && CRDD
XferDone && OWN
(descCnt == 0) &&
(rxPktBytes > 0)
rxPktBytes == 0
link == NULL
link!= NULL
FifoReady
XferDone
XferDone
XferDone
Event
(Continued)
Table 5-6 Receive State Tables
rxDescRead
rxFIFOblock
rxDescWrite
rxDescWrite
rxFIFOblock
rxDescRead
rxFragWrite
Next State
rxDescRefr
rxAdvance
rxAdvance
rxIdle
rxIdle
85
Start a burst transfer at address RXDP and a length
derived from RXCFG.
Start a burst transfer to refresh the link field of the current
descriptor.
Set ISR:RXIDLE.
Start a burst transfer from the RxDataFIFO to host
memory at fragPtr. The length will be the minimum of
rxPktBytes and descCnt. Decrement descCnt
accordingly.
Start a burst transfer to write the status back to the
descriptor, setting the OWN bit, and setting the MORE
bit. We'll continue the packet in the next descriptor.
Start a transfer to write the cmdsts back to the descriptor,
setting the OWN bit and clearing the MORE bit, and
filling in the final receive status (CRC, FAE, SIZE, etc.).
RXDP <- rxDescCache.link. Clear CRDD. Start a burst
transfer at address RXDP with a length derived from
RXCFG:MXDMA.
Set CRDD. Set ISR:RXIDLE.
Actions
www.national.com