2ED020I12-FI Infineon Technologies, 2ED020I12-FI Datasheet - Page 21

• Manufacturer Part Number: 2ED020I12-FI
• Description: IC, IGBT DRIVER, DUAL, PG-DSO-18-2
• Manufacturer: Infineon Technologies
• Type: MOSFET/IGBT Driverr

Specifications of 2ED020I12-FI

• Device Type: IGBT
• Module Configuration: High Side
• Peak Output Current: 2A
• Input Delay: 85ns
• Output Delay: 85ns
• Supply Voltage Range: 14V To 18V
• Driver Case Style: SO
• No. Of Pins: 18
• Operating: RoHS Compliant
• Product: Half-Bridge Drivers
• Rise Time: 40 ns
• Fall Time: 35 ns
• Supply Voltage (min): 14 V
• Supply Current: 2.3 mA
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: PG-DSO-18-2
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 2
• Number Of Outputs: 2
• Output Current: 5 mA
• Output Voltage: 5.3 V
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

8
8.1
To minimize the current consumption when the operational amplifier is not used, it is
necessary to connect both inputs properly, e.g connect OP+ to 5V and OP- to 0V or vice
versa.
On the other hand, the operational amplifier cannot operate with a follower configuration
, i.e OP- = OPO. A minimum gain of 3 has to be used so that its output OPO has a stable
behaviour.
8.2
a) The connection of a capacitor (>10nF) as close as possible to the supply pins VSH,
VSL is recommended for avoiding that possible oscillations in the supply voltage can
cause erroneous operation of the output driver stage. Total value of capacitance
connected to the supply terminals has to be determined by taking into account
gatecharge, peak current, supply voltage and kind of power supply.
b) If a bootstrap power supply for the high side driver is applied, a resistor of 10
minimum in series with the bootstrap diode is recommended.
Final Datasheet
Application Advices
Operational Amplifier
Power Supply
Final Data
21
High and Low Side Driver
Application Advices
2ED020I12-FI
September 2007