LIS3LV02DLTR STMicroelectronics, LIS3LV02DLTR Datasheet - Page 11

• Manufacturer Part Number: LIS3LV02DLTR
• Description: IC MEMS INERTL SENSOR 3AX LGA16
• Manufacturer: STMicroelectronics

Specifications of LIS3LV02DLTR

• Featured Product: STM32 Cortex-M3 Companion Products
• Axis: X, Y, Z
• Acceleration Range: ±2g, 6g
• Sensitivity: 1024LSB/g, 340LSB/g
• Voltage - Supply: 2.16 V ~ 3.6 V
• Output Type: Digital
• Bandwidth: 40Hz ~ 2.56kHz Selectable
• Interface: I²C, SPI
• Mounting Type: Surface Mount
• Package / Case: 16-LGA
• Family Name: LIS3LV02DL
• Package Type: LGA
• Operating Supply Voltage (min): 2.16V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 4.4mm
• Product Length (mm): 7.5mm
• Mounting: Surface Mount
• Pin Count: 16
• Sensing Axis: X, Y, Z
• Acceleration: 2 g, 6 g
• Digital Output - Number Of Bits: 12 bit, 16 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.16 V
• Supply Current: 0.65 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Digital Output - Bus Interface: I2C, SPI
• For Use With: 497-8261 - BOARD EVAL BASED ON LIS3LV02DL497-5069 - EVAL BOARD 3AXIS MEMS ACCELLRMTR
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8415-2; LIS3LV02DLTR

LIS3LV02DL
Table 3.
1. The product is factory calibrated at 3.3 V. The device can be used from 2.16 V to 3.6 V
2. Typical specifications are not guaranteed
3. Verified by wafer level test and specification of initial offset and sensitivity
4. Zero-g level offset value after MSL3 preconditioning
5. Offset can be eliminated by enabling the built-in high pass filter (HPF)
6. Results of accelerated reliability tests
7. Self Test output changes with the power supply. “Self test output change” is defined as OUTPUT[LSb]
8. Output data reach 99% of final value after 5/ODR when enabling Self-Test mode due to device filtering
9. ODRx is output data rate. Refer to
Symbol
ctrl_reg1=1)
CrAx
BW
Top
Wh
NL
V
st
- OUTPUT[LSb]
Non Linearity
Cross axis
Self test output change
System Bandwidth
Operating Temperature
Range
Product Weight
Mechanical characteristics @ Vdd=3.3 V, T=25 °C unless otherwise noted
(continued)
Parameter
(Self-test bit on ctrl_reg1=0)
(9)
Table 5
(7),(8)
for specifications
Best fit straight line
X, Y axis
Full-scale = ±2 g
ODR=40 Hz
Best fit straight line
Z axis
Full-scale = ±2 g
ODR=40 Hz
Full-scale= ±2g
X axis
Full-scale= ±2 g
Y axis
Full-scale= ±2 g
Z axis
Full-scale= ±6 g
X axis
Full-scale= ±6 g
Y axis
Full-scale= ±6 g
Z axis
. 1LSb=1g/1024 at 12bit representation, 2g Full-Scale
Test conditions
Mechanical and electrical specifications
Min.
-100
-3.5
250
250
-30
-40
80
80
ODRx/4
Typ.
-350
-120
550
550
180
180
±2
±3
72
(2)
(Self-test bit on
Max.
-600
-200
900
900
300
300
+85
3.5
(1)
mgram
%FS
Unit
LSb
LSb
LSb
LSb
LSb
LSb
Hz
°C
%
11/48