1323XNSK Freescale Semiconductor, 1323XNSK Datasheet - Page 16

• Manufacturer Part Number: 1323XNSK
• Description: KIT DEV FOR 1323X_NETWORK
• Manufacturer: Freescale Semiconductor
• Type: Transceiver, 802.15.4r

Specifications of 1323XNSK

• Frequency: 2.4GHz
• Interface Type: SPI
• For Use With/related Products: MC1323x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.8
The MC1323x real-time counter module consists of one 16-bit counter, one 16-bit comparator, several
binary-based and decimal-based prescaler dividers, three clock sources, and one programmable periodic
interrupt. This module can be used for time-of-day, calendar or any task scheduling functions. It can also
serve as a cyclic wake-up from low power modes (STOP2, STOP3 and WAIT). RTC can be clocked from
bus clock, the optional 32.768 kHz oscillator or the onboard 1 kHz low power oscillator.
Features of the RTC module include:
9
Development support for the HCS08 on the MC1323x includes the background debug controller (BDC)
and the on-chip debug module (DBG). The BDC provides a single-wire (signal BKGD) debug interface
to the MCU that provides a convenient interface for programming the on-chip FLASH and other storage.
The BDC is also the primary debug interface for development and allows non-intrusive access to memory
data and traditional debug features such as CPU register modify, breakpoints, and single instruction trace
commands.
Address and data bus signals are not available on external pins. Debug is done through commands fed into
the MCU via the single-wire background debug interface. The debug module provides a means to
selectively trigger and capture bus information so an external development system can reconstruct what
happened inside the MCU on a cycle-by-cycle basis without having external access to the address and data
signals. Features include:
16
•
•
•
•
•
•
•
•
•
— Frequency shift key (FSK)
— Direct software control of IRO pin
Extended space operation in time, baseband, and FSK modes
Module clock source is peripheral clock (16 MHz max)
Interrupt on end of cycle
Ability to disable IRO pin and use as timer interrupt
16-bit up-counter
— 16-bit modulo match limit
— Software controllable periodic interrupt on match
Three software selectable clock sources for input to prescaler with programmable 16 bit prescaler
— 32.768 kHz optional crystal oscillator.
— 32 MHz reference oscillator
— 1 kHz low power RC oscillator
Useful for time base tick or time-of-day clock
Can be used for device wake-up; capable of greater than one day time-out period.
Development Environment
Single-wire background debug interface
Real-time Counter (RTC) Module
MC1323x Advance Information, Rev. 1.2
Freescale Semiconductor