MPC8572EAMC Freescale Semiconductor, MPC8572EAMC Datasheet - Page 65

• Manufacturer Part Number: MPC8572EAMC
• Description: MPC8572 AMC RAPID SYSTEM
• Manufacturer: Freescale Semiconductor
• Type: MPUr

Specifications of MPC8572EAMC

• Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MPC8572E

5.6.1.5
The Out Of Band (OOB) module management may be facilitated by utilizing messages carried over
IPMB-L. The IPMB-L is an I2C bus with clock line AMC_SCL and data line AMC_SDA.
5.6.1.6
Three Geographic Address (AMC_GA[0:2]) pins represent the module address to the IPMC. Each GA line
is in one of three states, High, Ground, or Unconnected. The MMC senses the logical states of these pins
to determine its unique IPMB-L address.
5.6.1.7
The MMC supports two temperature sensors. The MMC monitors the temperature sensors and this data
can be identified in the MMC’s Sensor Data Records.
5.6.1.8
Voltage sensors report the status of the power within the module. The MMC supports five power sources:
12 V, 3.3 V, 2.5 V, 1.8 V, and 1.5 V.
5.6.1.9
The MMC can be interrogated by the user via the ColdFire UART connector, which is located on the
expansion card.
5.6.1.10
The ColdFire device can be programmed via the BDM header, which is located on the expansion header.
5.6.1.11
The module contains a serial EEPROM (SEEPROM), which can be used to store relevant data about the
AdvancedMC (Serial number, etc.). Note that FRU data is stored in the ColdFire’s internal memory
5.6.2
5.6.2.1
To hot swap a board complete the following steps:
Hot swapping in a board:
Freescale Semiconductor
1. Set switch SW4.4 to ON to select the MMC present option
2. Insert the AdvancedMC into the slot with the handle extracted. The BLUE LED switches ON once
3. Close the handle. The BLUE LED flashes and then switches OFF. The board powers up.
it is inserted.
MMC User Operation
Module Management Communications Bus (IPMB-L)
Geographical Address (GA[2:0])
Module temperature Sensors
Module Voltage Sensors
MMC UART
BDM Debug Header
Persistent Store
Hot Swapping
MPC8572EAMC Advanced Mezzanine Card User Guide, Rev. 1.2
MPC8572EAMC Functional Description
5-41