MC13783VK5 Freescale Semiconductor, MC13783VK5 Datasheet - Page 40

• Manufacturer Part Number: MC13783VK5
• Description: IC PWR MNGMNT ATLAS 3G 247MAPBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13783VK5

• Applications: Handheld/Mobile Devices
• Operating Temperature: -30°C ~ 85°C
• Mounting Type: *
• Package / Case: 247-MAPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Voltage - Supply: -

Functional Description
4.4.2.3
The ADC parameters are programmed by the processors via SPI. Locally on MC13783, the different ADC
requests are arbitrated and executed. When a conversion is finished, an interrupt is generated to the
processor which started the conversion.
4.4.2.3.1
The ADC will have the ability to start a series of conversions based on a rising edge of the ADTRIG signal
or directly initiated by SPI.
Once conversion is initiated all 8 channels will be sequentially converted and stored in registers or eight
conversions on one channel will be performed and stored. The conversion result can digitally be compared
with respect to a preset value for threshold detection.
The conversion will begin after a delay set between 0 and 8 ms. The delay between conversions can be
made equal to this delay.
To avoid that the ADTRIG input involuntarily triggers a conversion, a bit can be set which will make the
ADC ignores any transition on the ADTRIG pin.
4.4.2.3.2
Once a series of eight A/D conversions is complete, they are stored in one set of eight internal registers and
the values can be read out by software.
4.4.2.4
A SPI controllable pulse generator is available at ADOUT synchronized with the ADC conversion. This
pulse can be used to enable or drive external circuits only during the period of 4 or 8 ADC conversions.
4.4.2.5
4.4.2.5.1
Traditional battery capacity estimation is based on battery terminal voltage reading combined with
estimated phone current drain based on emitted PA power. For improved battery capacity estimation,
especially in non transmit mode like gaming, this method is too approximate. To improve the estimation,
the current out of the battery must be quantified more accurately. For this, on the MC13783, the current
flowing out of and into the battery can be read via the ADC by monitoring the voltage drop over the sense
resistor between BATT and BATTISNS.
4.4.2.5.2
The charge current is read by monitoring the voltage drop over the charge current sense resistor.
4.4.2.5.3
If a battery is equipped with a battery thermistor, its value can be read out via the ADC input ADIN5. The
biasing and sensing circuit is entirely integrated and is only powered during the A to D conversions.
40
Control
Pulse Generator
Dedicated Channels Reading
Starting Conversions
Reading Conversions
Battery Current
Charge Current
Battery Thermistor
MC13783 Technical Data, Rev. 3.5
Freescale Semiconductor