MNZB-24-B0 MeshNetics, MNZB-24-B0 Datasheet - Page 19

• Manufacturer Part Number: MNZB-24-B0
• Description: MOD 802.15.4/ZIGB 2.4GHZ RF PORT
• Manufacturer: MeshNetics
• Series: Zigbit™r

Specifications of MNZB-24-B0

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Power - Output: 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 19mA
• Current - Transmitting: 18mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kBytes Flash, 8kBytes RAM, 4kBytes EEPROM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Other names: 758-1000-2; ZDM-A1281-B0

CANADA (IC)
IMPORTANT: This equipment for which a certificate has been issued is not considered certified if it is not properly
IMPORTANT: Operation is subject to the following two conditions: (1) this device may not cause harmful
IMPORTANT: To reduce potential radio interference to other users, the antenna type and its gain should be so
IMPORTANT: The installer of this radio equipment must ensure that the antenna is located or pointed such that it
EUROPEAN UNION (ETSI)
IMPORTANT: The 'CE' marking must be affixed to a visible location on the OEM product. The CE mark shall consist
© 2007 MeshNetics
Equipment is subject to certification under the applicable RSSs, shall be permanently labelled on each
item, or as an inseparable combination. The label must contain the following information for full
compliance:
labelled. The information on the Canadian label can be combined with the manufacturer’s other labelling
requirements
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
does not emit RF field in excess of Health Canada limits for the general population. Consult Safety Code
6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.
The ZDM-A1281-A2 and ZDM-A1281-B0 Modules has been certified for use in European Union
countries.
If the ZDM-A1281-A2 and ZDM-A1281-B0 Modules are incorporated into a product, the manufacturer
must ensure compliance of the final product to the European harmonized EMC and low-voltage/safety
standards. A Declaration of Conformity must be issued for each of these standards and kept on file as
described in Annex II of the R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the ZDM-A1281-A2 and ZDM-A1281-B0
Modules documentation and ensure the final product does not exceed the specified power ratings,
antenna specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards.
of the initials "CE" taking the following form:
More detailed information about CE marking requirements you can find at “DIRECTIVE 1999/5/EC OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL” on 9 March 1999 at section 12.
Certification Approved Antennas list is presented in below.
•
•
•
For ZDM-A1281-A2 module:
For ZDM-A1281-B0 module:
Certification Number:
Manufacturer’s Name, Trade Name or Brand Name:
Model Name:
Certification Number:
Manufacturer’s Name, Trade Name or Brand Name:
Model Name:
If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing
must be respected.
The CE marking must have a height of at least 5mm except where this is not possible on
account of the nature of the apparatus.
The CE marking must be affixed visibly, legibly, and indelibly.
Zi gBi t™ O EM M odule s
IC: 7036A-ZIGBITA2
ZIGBIT
ZDM-A1281-A2
IC: 7036A-ZIGBITB0
ZIGBIT
ZDM-A1281-B0
Product Datasheet
Page 19 of 24