GM-205610-000 DeLorme, GM-205610-000 Datasheet - Page 13

• Manufacturer Part Number: GM-205610-000
• Description: MODULE GPS RCVR GPS2056-10
• Manufacturer: DeLorme

Specifications of GM-205610-000

• Frequency: 1.575GHz
• Data Rate - Maximum: 57.6 kbps
• Modulation Or Protocol: GPS
• Applications: GPS Receiver
• Current - Receiving: 50mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40 Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Sensitivity: -
• Memory Size: -
• Other names: GM-205610-000TR

$PSTMALMANAC
This command allows to the user to load the almanacs data into backup RAM.
Command: $PSTMALMANAC,<sat_id>,<N>,<byte1>,.....,<byteN>*<checksum><cr><lf>
Results: The almanac will stored into backup RAM, no message will be sent as reply.
$PSTMDUMPALMANAC
This command sends out all almanacs stored in the backup RAM.
Command: $PSTMDUMPALMANAC <cr><lf>
Results: $PSTMALMANAC,<sat_id>,<N>,<byte1>,.....,<byteN>*<checksum><cr><lf>
$PSTMGPSRESET
This command resets the GPS receiver
Command: $PSTMGPSRESET <cr><lf>
Results: The GPS receiver will be reset, no message will be sent as reply.
$PSTMGPSSUSPEND
This command suspends the GPS receiver.
Command: $PSTMGPSSUSPEND <cr><lf>
Results: The GPS receiver will be suspended, no message will bet sent as reply.
$PSTMGPSRESTART
This command restarts the GPS receiver.
Command: $PSTMGPSRESTART <cr><lf>
Results: The GPS receiver will be restarted, no message will bet sent as reply.
$PSTMTESTRF
Returns satid, frequency offset, phase error, Cn0 of the satellite in the channel 0 of the correlator and centre frequency offset
Command: $PSTMTESTRF<cr><lf>
Results: $PSTMTESTRF,<chan_id>,<sat_id>,<frequency_offset>,<phase_noise>,<cn0>,<center_freq>*<checksum><cr><lf>
$PSTMNMEACONFIG
Configure NMEA: baud rate, message list, transmit mode.
Command: $PSTMNMEACONFIG,<port>,<baud_rate>,<msg_list>,<transmit_mode><cr><lf>
Parameter
sat_id
N
byte1
byteN
checksum
Parameter
sat_id
N
byte1
byteN
checksum
Parameter
chan_id
sat_id
frequency_offset
phase_noise
CN0
center_freq
checksum
Parameter
port
baud_rate
msg_list
transmit_mode
Format
%j
%i
%02x
%02x
%02x
Format
%j
%i
%02x
%02x
%02x
Format
%1d
%07d
%04d
%1d
Format
%02d
%02d
%05d
%04d
%02d
%d
%02x
Description
Satellite number
Number of the almanac data bytes
First byte of the almanac data
Last byte of the almanac data
Checksum of the message bytes without *<checksum><cr><lf> characters.
Description
Satellite number
Number of the almanac data bytes
First byte of the almanac data
Last byte of the almanac data
Checksum of the message bytes without *<checksum><cr><lf> characters.
Description
Correletor channel number
Satellite number
Frequency offset
Phase noise
Signal to noise ratio
Center frequency offset
Checksum of the message bytes without *<checksum><cr><lf> characters.
Description
0 for UART - 1 = Reserved
UART baudrate
Output message list (see below)
0 to transmit on UTC second - 1 to transmit after FIX
Page 13