UPD78F9201MA-CAC-A Renesas Electronics America, UPD78F9201MA-CAC-A Datasheet - Page 97

• Manufacturer Part Number: UPD78F9201MA-CAC-A
• Description: MCU 8BIT 2KB FLASH 128B RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9201MA-CAC-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 7
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

6.3
The following seven types of registers are used to control 16-bit timer/event counter 00.
(1) 16-bit timer mode control register 00 (TMC00)
16-bit timer mode control register 00 (TMC00)
Capture/compare control register 00 (CRC00)
16-bit timer output control register 00 (TOC00)
Prescaler mode register 00 (PRM00)
Port mode register 2 (PM2)
Port register 2 (P2)
Port mode control register 2 (PMC2)
Registers to Control 16-Bit Timer/Event Counter 00
Cautions 6. Changing the CR010 setting during TM00 operation may cause a malfunction. To change
This register sets the 16-bit timer operating mode, the 16-bit timer counter 00 (TM00) clear mode, and output
timing, and detects an overflow.
TMC00 is set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation sets the value of TMC00 to 00H.
Caution 16-bit timer counter 00 (TM00) starts operation at the moment TMC002 and TMC003
TMC003 to 0, 0 to stop the operation.
(operation stop mode) are set to a value other than 0, 0, respectively. Set TMC002 and
the setting, refer to 6.5 Cautions Related to 16-Bit Timer/Event Counter 00 (17) Changing
compare register during timer operation.
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00 ( PD78F920x ONLY)
User’s Manual U18172EJ3V0UD
95