HD64F3672FY Renesas Electronics America, HD64F3672FY Datasheet - Page 233

• Manufacturer Part Number: HD64F3672FY
• Description: IC H8 MCU FLASH 16K 48QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FY

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 48-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

14.3.2
ADCSR consists of the control bits and conversion end status bits of the A/D converter.
Bit
7
6
5
4
3
Bit Name
ADF
ADIE
ADST
SCAN
CKS
A/D Control/Status Register (ADCSR)
Initial Value
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
Description
A/D End Flag
[Setting conditions]
[Clearing condition]
A/D Interrupt Enable
A/D conversion end interrupt (ADI) request enabled
by ADF when 1 is set
A/D Start
Setting this bit to 1 starts A/D conversion. In single
mode, this bit is cleared to 0 automatically when
conversion on the specified channel is complete. In
scan mode, conversion continues sequentially on
the specified channels until this bit is cleared to 0 by
software, a reset, or a transition to standby mode.
Scan Mode
Selects single mode or scan mode as the A/D
conversion operating mode.
0: Single mode
1: Scan mode
Clock Select
Selects the A/D conversions time
0: Conversion time = 134 states (max.)
1: Conversion time = 70 states (max.)
Clear the ADST bit to 0 before switching the
conversion time.
When A/D conversion ends in single mode
When A/D conversion ends on all the channels
selected in scan mode
When 0 is written after reading ADF = 1
Rev.4.00 Nov. 02, 2005 Page 207 of 304
Section 14 A/D Converter
REJ09B0143-0400