PIC16CE625-04/SS Microchip Technology, PIC16CE625-04/SS Datasheet - Page 44

• Manufacturer Part Number: PIC16CE625-04/SS
• Description: IC MCU OTP 2KX14 EE COMP 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16CE625-04/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 13
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SSOP
• For Use With: 309-1016 - ADAPTER 20-SSOP TO 18-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Connectivity: -

PIC16CE62X
8.4
Response time is the minimum time, after selecting a
new reference voltage or input source, before the
comparator output has a valid level. If the internal refer-
ence is changed, the maximum delay of the internal
voltage reference must be considered when using the
comparator outputs, otherwise the maximum delay of
the comparators should be used (Table 13-1 ).
FIGURE 8-3:
DS40182C-page 44
Comparator Response Time
COMPARATOR OUTPUT BLOCK DIAGRAM
To RA3 or
RA4 Pin
Set
CMIF
Bit
Data
Bus
RD CMCON
From
Other
Comparator
Q
Q
EN
8.5
The comparator outputs are read through the CMCON
register. These bits are read only. The comparator
outputs may also be directly output to the RA3 and RA4
I/O pins. When the CM<2:0> = 110, multiplexors in the
output path of the RA3 and RA4 pins will switch and the
output of each pin will be the unsynchronized output of
the comparator. The uncertainty of each of the
comparators is related to the input offset voltage and
the response time given in the specifications.
Figure 8-3 shows the comparator output block diagram.
The TRISA bits will still function as an output
enable/disable for the RA3 and RA4 pins while in this
mode.
D
CL
Note 1: When reading the PORT register, all pins
EN
D
NRESET
2: Analog levels on any pin that is defined
Comparator Outputs
RD CMCON
configured as analog inputs will read as
a ‘0’. Pins configured as digital inputs will
convert an analog input according to the
Schmitt Trigger input specification.
as a digital input may cause the input
buffer to consume more current than is
specified.
MULTIPLEX
Port Pins
+
-
1999 Microchip Technology Inc.