PIC18F65J15T-I/PT Microchip Technology, PIC18F65J15T-I/PT Datasheet - Page 142

• Manufacturer Part Number: PIC18F65J15T-I/PT
• Description: IC PIC MCU FLASH 24KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J15T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: PIC18F65J15T-I/PT; PIC18F65J15T-I/PTTR

PIC18F87J10 FAMILY
11.7
PORTF is a 7-bit wide, bidirectional port. The corre-
sponding Data Direction register is TRISF. Setting a
TRISF bit (= 1) will make the corresponding PORTF pin
an input (i.e., put the corresponding output driver in a
high-impedance mode). Clearing a TRISF bit (= 0) will
make the corresponding PORTF pin an output (i.e., put
the contents of the output latch on the selected pin).
Only pin 7 of PORTF has no analog input; it is the only
pin that can tolerate voltages up to 5.5V.
The Output Latch register (LATF) is also memory
mapped. Read-modify-write operations on the LATF
register read and write the latched output value for
PORTF.
All pins on PORTF are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTF is multiplexed with several analog peripheral
functions, including the A/D Converter and comparator
inputs, as well as the comparator outputs. Pins, RF2
through RF6, may be used as comparator inputs or
outputs by setting the appropriate bits in the CMCON
register. To use RF<6:3> as digital inputs, it is also
necessary to turn off the comparators.
DS39663F-page 140
PORTF, LATF and TRISF Registers
EXAMPLE 11-6:
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
MOVLW
MOVWF
Note 1: On device Resets, pins, RF<6:1>, are
2: To configure PORTF as digital I/O, turn off
PORTF
LATF
07h
CMCON
0Fh;
ADCON1 ; Set PORTF as digital I/O
0CEh
TRISF
configured as analog inputs and are read
as ‘0’.
comparators and set ADCON1 value.
; Initialize PORTF by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
;
; Turn off comparators
; Value used to
; initialize data
; direction
; Set RF3:RF1 as inputs
; RF5:RF4 as outputs
; RF7:RF6 as inputs
INITIALIZING PORTF
© 2009 Microchip Technology Inc.