C8051F060-GQ Silicon Laboratories Inc, C8051F060-GQ Datasheet - Page 97

• Manufacturer Part Number: C8051F060-GQ
• Description: IC 8051 MCU 64K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F060-GQ

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 59
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b, 8x10b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F0x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: CAN/I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 59
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F060DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 2-ch x 12-bit
• No. Of I/o's: 59
• Ram Memory Size: 4352Byte
• Cpu Speed: 25MHz
• No. Of Timers: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1214 - DEV KIT FOR F060/F062/F063
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1213

7.3.
The ADC Programmable Window Detector continuously compares the ADC2 output registers to user-pro-
grammed limits, and notifies the system when a desired condition is detected. This is especially effective in
an interrupt-driven system, saving code space and CPU bandwidth while delivering faster system
response times. The window detector interrupt flag (AD2WINT in register ADC2CN) can also be used in
polled mode. The ADC2 Greater-Than (ADC2GTH, ADC2GTL) and Less-Than (ADC2LTH, ADC2LTL)
registers hold the comparison values. The window detector flag can be programmed to indicate when mea-
sured data is inside or outside of the user-programmed limits, depending on the contents of the ADC2
Less-Than and ADC2 Greater-Than registers.
Bits7-0: High byte of ADC2 Greater-Than Data Word.
Bits7-0: Low byte of ADC2 Greater-Than Data Word.
SFR Page:
SFR Address:
SFR Page:
SFR Address:
R/W
R/W
Bit7
Bit7
Programmable Window Detector
2
0xC5
2
0xC4
Figure 7.11. ADC2GTH: ADC2 Greater-Than Data High Byte Register
Figure 7.12. ADC2GTL: ADC2 Greater-Than Data Low Byte Register
R/W
R/W
Bit6
Bit6
R/W
R/W
Bit5
Bit5
R/W
R/W
Bit4
Bit4
Rev. 1.2
R/W
R/W
Bit3
Bit3
C8051F060/1/2/3/4/5/6/7
R/W
R/W
Bit2
Bit2
R/W
R/W
Bit1
Bit1
R/W
R/W
Bit0
Bit0
Reset Value
Reset Value
11111111
11111111
97